Bosch CCS 1000 D Operation Manual page 36

Digital discussion system
Hide thumbs Also See for CCS 1000 D:
Table of Contents

Advertisement

36
en | Configuration
Seats
Click the Seats button which opens the Seats overview page.
Here the devices can be assigned to seats:
Time (CCSD-CURD only)
Click the Time button which opens the Time and Date settings page:
Upgrade
Notice!
Upgrade is not available on tablets.
Click the Upgrade button which opens the software Upgrade page.
The Upgrade page is used to upgrade/maintain the software of the Control Unit:
1.
2.
3.
4.
5.
2014.09 | V1.0 |
Configure mode (select on device): When selected, a device can be located by selecting
the seat in the list or by pushing the device microphone request button. All device LEDs
are illuminated.
When the configure mode is active, devices cannot be used.
De‑init button: When clicked; it erases the address/subscription of the selected device.
All LEDs on the device are on when the device does not have an address/subscription.
Remove all disconnected seat button: Removes the subscribed seats from the seats
overview.
Seats overview:
Select: Click the icon to select the seat.
Seat: The seat name.
Camera: The camera name/number connected to the seat.
Preposition: Camera preposition setting (number) assigned to the seat.
Time: Select the local time.
Date: Select the current date.
From the product related information page on www.boschsecurity.com, download the
upgrade software file.
From the Upgrade page, click the browse button to select your saved software file.
Select the Control Unit or devices in the Select column, to which you want to download
the software.
Click the Upgrade button to start the uploading process.
Progress bars indicating the uploading process.
The uploading status is shown in the State column (Idle, Programming, Rebooting,
Done or Failed after reboot). If the upgraded file is corrupt or not recognized, an
error message becomes visible.
Software versions (numbers) are shown in the Version column. The uploaded
software version number is only shown when the upgrade process is succeeded.
Exit the Upgrade page after completion of the uploading process (Done state).
Operation manual
Digital Discussion System
Bosch Security Systems B.V.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents