Bosch CCS 1000 D Operation Manual page 14

14 en | Planning
LBB 4117/00 Cable Locking Clamps (25 pcs) – This cable locking clamp can be used to lock
the connectors of extension cables. One cabling locking clamp is required for each male/
female connector.
USB memory stick (CCSD‑CURD only) - A USB memory stick is required if you want to record
discussions directly to an external device. The USB memory stick should have the following
specifications:
–
–
–
If the USB memory stick is not formatted with the FAT32 file system, recordings will be saved
to the internal memory instead. The internal memory can save up to 8 hours of discussion at
the lowest bit rate. For an overview of the possible recording times compared to the bit rate,
see Technical data, page 46.
Notice!
USB memory sticks larger than 32 GB cannot be formatted with the standard windows format
tool. This must be done with the special tool that can found on the DVD.
USB cable with micro USB connector - A USB cable with a micro USB connector is required if
you want to transfer the internal memory (recordings) to a PC.
RJ45 Ethernet cable - An RJ45 Ethernet cable is required if you want to connect a laptop or
PC to the Control Unit for running the web browser and connecting system cameras.
RCA cables - RCA cables are required if you want to connect optional audio equipment to the
Control Unit, such as a sound reinforcement system.
XLR cable - An XLR cable is required if you want to connect an external microphone to the
Control Unit.
Wireless Access Point (AP) - A standard Wireless Access Point (AP) or router is required if
you want to connect equipment with a WiFi connection to the system.
2014.09 | V1.0 |
Preferred type: Sandisk
Maximum size: 128 GB
Formatting: FAT32 file system
Operation manual
Digital Discussion System
Bosch Security Systems B.V.