Control Unit Connections - Bosch CCS 1000 D Operation Manual

20 en | Connections
6.
7.
6.2

Control Unit connections

1
2
Figure 6.2: Rear view of CCSD-CURD Control Unit
The CCSD-CURD Control Unit has additional connections as indicated in the following table:
Number Item
1 FCC label
2 USB
(CCSD‑CURD only)
3 RCA 'Audio Out' (CCSD‑CURD
only)
4 Product label
5 RCA 'Audio Out (1)'
2014.09 | V1.0 |
Connect the supplied 24 VDC power supply connector to the 'Power' connector at the
rear of the Control Unit.
Connect the mains plug of the 24 VDC power supply to a mains supply.
– The system will automatically switch on at the moment the mains supply is
connected. This allows use of remote control for system on/off. See also Discussion
Device, page 27.
3 4
3
Description
Label showing FCC Declaration of Conformity.
Micro USB connector for transferring the internal memory (recordings)
to a PC.
Note: The micro USB connector cannot be used to directly record
discussions to a USB device. The larger USB connector on the front
panel of the unit should be used for this purpose.
Note: Recordings cannot be saved to the internal memory during the
transfer of files.
Note: Internal memory files will be saved as ‑IM.mp3 and USB
recordings as ‑USB.mp3. You can see these names in the web browser.
4 x audio output connectors for individual microphone recording, e.g.
for recording individual speakers in a courtroom.
Label showing information on the product, such as: product type, serial
number, technical data, and CE mark.
Audio output connector for connecting a 'sound reinforcement system'
to the discussion system. Enables proceedings to be transmitted to an
audience in the same room or an adjacent room.
5 6 7 8
9
Operation manual
Digital Discussion System
10 11 12 13
Bosch Security Systems B.V.
14