Introduction; General; Technical Data - ESAB LAE1000 Assembly Instruction Manual

GB
ARC WELDING AND CUTTING CAN BE INJURIOUS TO YOURSELF AND OTHERS. TAKE PRECAU-
TIONS WHEN WELDING. ASK FOR YOUR EMPLOYER'S SAFETY PRACTICES WHICH SHOULD BE
BASED ON MANUFACTURERS' HAZARD DATA.
ELECTRIC SHOCK - - Can kill
Install and earth the welding unit in accordance with applicable standards.
S
Do not touch live electrical parts or electrodes with bare skin, wet gloves or wet clothing.
S
Insulate yourself from earth and the workpiece.
S
Ensure your working stance is safe.
S
FUMES AND GASES - - Can be dangerous to health
Keep your head out of the fumes.
S
Use ventilation, extraction at the arc, or both, to take fumes and gases away from your breathing zone
S
and the general area.
ARC RAYS - - Can injure eyes and burn skin.
Protect your eyes and body. Use the correct welding screen and filter lens and wear protective
S
clothing.
Protect bystanders with suitable screens or curtains.
S
FIRE HAZARD
Sparks (spatter) can cause fire. Make sure therefore that there are no inflammable materials nearby.
S
NOISE - - Excessive noise can damage hearing
Protect your ears. Use earmuffs or other hearing protection.
S
Warn bystanders of the risk.
S
MALFUNCTION - - Call for expert assistance in the event of malfunction.
READ AND UNDERSTAND THE INSTRUCTION MANUAL BEFORE INSTALLING OR OPERATING.
WARNING
This product is intended for industrial use. In a domestic environment this
product may cause radio interference. It is the user's responsibility to take
adequate precautions.
3

INTRODUCTION

3.1

General

The welding power sources LAH and LAE (adapted to fit control equipment PEG--1)
can be converted to resemble LAF by way of a conversion kit, and by that be
adapted to fit the PEH control box (A2--A6 Process Controller).
For rational conversion all components necessary for the work are contained in the
conversion kit.
3.2

Technical data

The conversion of the power sources does not result in any divergencies with regard
to the technical data, compared to previously issued documentation.
dia3d1ea
WARNING
PROTECT YOURSELF AND OTHERS!
- - 16 - -