Related Manuals for ESAB LAF 1001
Summary of Contents for ESAB LAF 1001
- Page 1 LAF 1001 / LAF 1001M Instruction manual Valid for: serial no. 536-xxx-xxxx 0449 503 101 GB 20230412...
-
Page 3: Table Of Contents
MAINTENANCE ................... Cleaning ....................6.1.1 Welding power source ................6.1.2 Contactor ....................ORDERING SPARE PARTS ................ DIAGRAM ......................CONNECTION INSTRUCTION ................16 ORDERING NUMBERS ..................18 Rights reserved to alter specifications without notice. 0449 503 101 © ESAB AB 2023... -
Page 4: Safety
Safety Data Sheets (SDSs). Safety precautions Users of ESAB equipment have the ultimate responsibility for ensuring that anyone who works on or near the equipment observes all the relevant safety precautions. Safety precautions must meet the requirements that apply to this type of equipment. The following recommendations should be observed in addition to the standard regulations that apply to the workplace. - Page 5 Protect your eyes and body. Use the correct welding screen and filter lens and wear protective clothing. • Protect bystanders with suitable screens or curtains. NOISE - Excessive noise can damage hearing Protect your ears. Use earmuffs or other hearing protection. 0449 503 101 - 5 - © ESAB AB 2023...
- Page 6 For further information contact the nearest ESAB dealer. ESAB has an assortment of welding accessories and personal protection equipment for purchase. For ordering information contact your local ESAB dealer or visit us on our website. 0449 503 101 - 6 - ©...
-
Page 7: Introduction
2 INTRODUCTION INTRODUCTION LAF 1001/ LAF 1001M are remote-controlled 3-phase welding power sources intended for highly productive mechanised gas metal arc welding (MIG/MAG) or submerged arc welding (SAW). The welding power sources are fan-cooled and are monitored by a thermal cutout against overload. -
Page 8: Technical Data
Equipment marked IP23 is intended for indoor and outdoor use. Application class The symbol indicates that the power source is designed for use in areas with increased electrical hazard. 0449 503 101 - 8 - © ESAB AB 2023... -
Page 9: Installation
Secure the equipment - particularly if the ground is uneven or sloping. • Place the welding power source on a level foundation. • Make sure there is nothing to prevent the cooling. Lifting instructions 0449 503 101 - 9 - © ESAB AB 2023... -
Page 10: Connections
The mains cable areas and fuse sizes as shown above are in accordance with Swedish regulations. For other regions, supply cables must be suitable for the application and meet local and national regulations. 0449 503 101 - 10 - © ESAB AB 2023... -
Page 11: Operation
The indicator lamp goes out when the temperature in the welding power source has decreased to a permitted level. Pushbutton resetting the automatic fuse FU2 for 42 V supply voltage. 0449 503 101 - 11 - © ESAB AB 2023... -
Page 12: Maintenance
To ensure the reliable operation of the contactor, the magnetic parts must be kept clean. If the contactor has to be cleaned it must be taken apart, and all the pieces be cleaned. Alternatively, the contactor can be replaced. 0449 503 101 - 12 - © ESAB AB 2023... -
Page 13: Ordering Spare Parts
Repair and electrical work should be performed by an authorised ESAB service technician. Use only ESAB original spare and wear parts. LAF 1001 / LAF 1001M is designed and tested in accordance with the international and European standards 60974-1 and 60974-10. It is the obligation of the service unit which has carried out the service or repair work to make sure that the product still conforms to the said standard. -
Page 14: Diagram
DIAGRAM DIAGRAM 0449 503 101 - 14 - © ESAB AB 2023... - Page 15 DIAGRAM 0449 503 101 - 15 - © ESAB AB 2023...
-
Page 16: Connection Instruction
CONNECTION INSTRUCTION CONNECTION INSTRUCTION 0449 503 101 - 16 - © ESAB AB 2023... - Page 17 CONNECTION INSTRUCTION 0449 503 101 - 17 - © ESAB AB 2023...
-
Page 18: Ordering Numbers
0460 513 880 Welding power source LAF 1001 0460 513 881 Welding power source LAF 1001M 0459 839 057 Spare parts list LAF 1001 / LAF 1001M Technical documentation is available on the Internet at: www.esab.com 0449 503 101 - 18 -... - Page 19 ORDERING NUMBERS 0449 503 101 - 19 - © ESAB AB 2023...
- Page 20 For contact information visit esab.com ESAB AB, Lindholmsallén 9, Box 8004, 402 77 Gothenburg, Sweden, Phone +46 (0) 31 50 90 00 manuals.esab.com...