Safety Data Sheets (SDSs). Safety precautions Users of ESAB equipment have the ultimate responsibility for ensuring that anyone who works on or near the equipment observes all the relevant safety precautions. Safety precautions must meet the requirements that apply to this type of equipment. The following recommendations should be observed in addition to the standard regulations that apply to the workplace.
2 INTRODUCTION INTRODUCTION LAF 1251 / LAF 1251M are remote-controlled 3-phase welding power sources designed for high-efficiency mechanical submerged-arc welding (SAW). The welding power sources are fan-cooled and are monitored by a thermal cutout against overload. When the thermal cutout is deployed the yellow lamp on the front panel illuminates automatically.
Repair and electrical work should be performed by an authorised ESAB service technician. Use only ESAB original spare and wear parts. LAF 1251 / LAF 1251M is designed and tested in accordance with the international and European standards IEC-/EN 60974-1 and IEC-EN 60974-10. It is the obligation of the service unit which has carried out the service or repair work to make sure that the product still conforms to the said standard.