GB
Remove (cut off) the conductor 077 between the board K45.3 and the collector
S
rail.
Only remount the RC filter fitted in the old power source.
S
Remove the old connection diagram on the inside of the cover plate.
S
2. Follow the instructions below for the conversion of LAE 800/1000:
Dismount the cable stem, excluding the cables 034 and 035 for the power supply
S
of the control transformer.
Dismount all electronics boards and their fittings.
S
Dismount the control panel.
S
Remove the support with the attached fuse--bases.
S
Remove the lower fuse (K21.2 = fuse for 42 V AC from the control transformer
S
K9).
The other two fuses are to be re--used together with the rubber spacers, but
fitted elsewhere in the power source.
Remove the multi--pole contact devices on the bottom plate and cover the holes
S
by way of two plastic plugs from the kit.
Remove the signs (a sticker and a screwed sign marked 42 V) from the bottom
S
plate.
Dismount the terminal block on the control transformer.
S
Cover the contactor and the control transformer before drilling new mounting
S
holes.
dia3d1ea
- - 18 - -