BDI SEQUEL Assembly Instructions

SEQUEL 6021
EXECUTIVE DESK
Product Registration
Registering your new BDI product allows us to send you important
product updates, service information and helpful hints related to your
BDI products. Register today and you will be entered to win free a
BINK table from BDI. www.bdiusa.com/product-registration/
Placement and Maintenance
Sequel Office furniture is designed for indoor use on level floors.
Clean glass with glass cleaner, and steel parts and wood veneer with
a moist cloth.
Your Sequel Office furniture is engineered for easy assembly.
Carefully follow this procedure to prevent any damage.
Do not use power tools for assembly of this product.
Step 1
Unpack and identify the parts listed below. The assembly
workspace should be a non-marring surface such as carpet. For
missing hardware pieces, please contact BDI Customer Service at
customerservice@bdiusa.com. For all other concerns, please contact
your BDI retailer.
C - Wire Management Lid x 1
D - Modesty Panel x 1
E - Wire Management Trough x 1
H - Removable Side Panel x 2
* Remove for Assembly
Designed by Matthew Weatherly.
These distinctive product configurations are protected by US and international patents, trade dress, and/or
copyright laws. Sequel & BDI are trademarks of Becker Designed, Inc. All rights reserved. ©2016, BDI
Made in Taiwan. 05.09.2016 V10
customerservice@bdiusa.com
B - Top Glass x 1
A - Drawer Assembly x 1
F - Left Leg x 1
I - Glide x 4
bdiusa.com
J 4mm Hex Wrench x 1
K 1/4-20 x 12mm Screw x 3
L 1/4-20 x 32mm Screw x 6
M Barrel Nut x 4
N 1/4-20 x 15mm Screw x 4
O 1/4-20 x 58mm Screw x 6
P 1/4-20 x 87mm Screw x 2
Q Center Drawer Liner x 1
R Side Drawer Liner x 2
S Rubber Stem Bumper x 5
T 8/32 x 37mm Screw x 4
H - Removable Side Panel x 2
* Remove for Assembly
G - Right Leg x 1