BDI SOLA 6853 Owner's Manual

SOLA
LIFT DESK
OWNER'S MANUAL
Product Registration
Registering your new BDI product allows us to send you important
product updates, service information and helpful hints related to your BDI
products. Register today, and you will be entered to win free a BINK table
from BDI: www.bdiusa.com/register
Placement and Maintenance
Sola® Lift Desk is designed for indoor use on level floors. Clean steel
parts and wood panel with a moist cloth.
Your Sola® Office furniture is engineered for easy assembly. Carefully
follow this procedure to prevent any damage. Do not use power tools
for assembly of this product.
Step 1
Unpack and identify the parts listed below. The assembly workspace
should be a non-marring surface such as carpet. For missing hardware
pieces, please contact BDI Customer Service at
customerservice@bdiusa.com.
For all other concerns, please contact your BDI retailer.
C6 Cord
Conduit x 1
C2 Foot x 2
Designed by Matthew Weatherly.
These distinctive product configurations are protected by US and international patents, trade dress, and/or
copyright laws. Sola & BDI are trademarks of Becker Designed, Inc. All rights reserved. ©2018, BDI
Patent: www.bdiusa.com/ip
Made in China. 06.14.2018 V1
6853
®
bdiusa.com
customerservice@bdiusa.com
Tool Included:
T1 4mm Hex Wrench
H1 #10 Wood Screw x 4
H2 #6 Wood Screw x 6
H3 M6 x 11mm Screw x 14
H4 M6 x 9mm Screw x 4
H5 M6 x 16mm Screw x 8
H6 Wire clip x 6
H7 Leveler x 4
H9 Dual Lock Dot x 8
A1 Main Panel x 1
C3 Control Module x 1
C4 Keypad x 1
C1 Leg x 2
C8 Modesty panel
bracket x 2
C9 Modesty panel x 1
C7 Wire tray x 1
C5 Power Cord x 1
Tool Required:
Phillips screwdriver