Black Level Adjustment - Sony BVM-1916 Operation And Maintenance Manual

7
Press the GAIN button.
The associated lamp lights.
8
Adjust the white balance at the highlight by pressing the BLUE,
GREEN and RED buttons
t
or •.
9
When the adjustment is completed, press the WHITE button so
that the lamp goes off and the white signal disappears.
For white balance adjustment using a color analyzer or equivalent, see
Section 2.
1-5-2. Black Level Adjustment
Match the black reference of the monitor with the black level of the
input signal to be monitored.
23
I I
0 0 011
c
0••
0
•Q,,-,,,
0 0 0 ~ c 0·"- o O ·"
c•,nc,j ·'"· ,,,,.,------,
1,4- :
~:'.ti
O O
~ ~
: :·
1
Press the PIC SETUP button.
The associated lamp lights and a vertical picture band and the
black reference of the monitor are displayed on the screen.
2
Press the POSITION buttons t or• to move the position of the
picture band horizontally so that the black signal of the picture is
located next to the black reference area.
3
Press the LEVEL buttons
t
or • to match the brightness of the
black reference area with that of the input black signal.
4
Press the PIC SETUP button again.
1.
Operation
1 -43