Selecting The White Balance - Sony BVM-1916 Operation And Maintenance Manual

3
Depress the PHASE, CHROMA, BRIGHTNESS and
CONTRAST MANUAL switches and turn the respective controls
so that the desired levels are obtained.
4
Press the PIC SETUP button so that the associated lamp lights and
adjust the setup level for the picture by pressing the LEVEL
buttons.
Em
The adjustments in steps 3 and 4 can be precisly performed while
observing the numeric level indications (0 through 200, centering with
100) on the lower half of the menu display.
To adjust while observing the picture on the screen, set the cursor
to TEXT ON/OFF and press the ENT button, and the SA VE
PRESETS menu disappears.
For the picture setup level, follow the procedure in "1-5-2. Black
Level Adjustment."
To return to the SA VE PRESETS menu, press the ENT button again.
5
Move the cursor to the register in which the set levels are to be
stored and press the ENT button.
The levels set in steps 3 and 4 are now stored in the register selected in
step 5.
The message "DA TA SAVED" is momentarily displayed, and the
monitor returns to normal status.
Repeat this procedure for the other registers as desired.
To cancel the operation
Press the ESC button before pressing the ENT button in step 5.
1-4-4. Selecting the White Balance
The four settings for white balance can be stored in Registers RO to
R3. At the factory, the setting for D65 has been stored in all the
registers
mm
The settings for white balance are stored in combination with the
picture levels set through the PRESETS menu operation in the same
Registers RO through R3.
1. Operation
1 -27