Environment Concerns - AEG HC451500EB User Manual

comes on
comes on
and number come on.
comes on
There is no signal when you
touch the panel sensor fields.
If you tried the above solutions and cannot repair the problem, speak to your dealer or the
Customer Care Department. Give the data from the rating plate, three-digit-letter code for
the glass ceramic (it is in the corner of the cooking surface) and an error message that
comes on.
If you operated the appliance incorrectly, the servicing by a customer service technician or
dealer will not be free of charge, even during the warranty period. The instructions about
the customer service and conditions of guarantee are in the guarantee booklet.

ENVIRONMENT CONCERNS

The symbol
treated as household waste. Instead it should be taken to the appropriate collection point
for the recycling of electrical and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential negative consequences for the
environment and human health, which could otherwise be caused by inappropriate waste
handling of this product. For more detailed information about recycling of this product,
please contact your local council, your household waste disposal service or the shop where
you purchased the product.
Packaging material
The packaging materials are friendly to the environment and can be recycled. The plastic
components are identified by marking: >PE<,>PS<, etc. Discard the packaging materials as
household waste at the waste disposal facilities in your municipality.
DeluxeAppliances - EUappliances.com
Problem
• The Automatic Switch Off operates. Deactivate the appliance
• No cookware on the cooking zone. Put cookware on the cook-
• Not correct cookware. Use the correct cookware.
• The diameter of the bottom of the cookware is too small for
There is an error in the appliance.
Disconnect the appliance from the electrical supply for some
time. Disconnect the fuse from the electrical system of the house.
Connect again. If
There is an error in the appliance, because a cookware boils dry.
The protection against become too hot for the cooking zone op-
erates. The Automatic Switch Off operates.
Deactivate the appliance. Remove the hot cookware. After, ap-
proximately 30 seconds activate the cooking zone again.
should go out of the display, residual heat indicator can stay. Let
the cookware become sufficiently cool and check it with the sec-
tion Cookware for the induction cooking zone.
The signals are deactivated.
Activate the signals (see OffSound Control ).
on the product or on its packaging indicates that this product may not be
Possible cause and remedy
and activate it again.
ing zone.
the cooking zone. Move cookware to a smaller cooking zone.
comes on again, speak to the service centre.
Environment concerns 37