What To Do If - AEG HC451500EB User Manual

36

What to do if...

To remove the dirt:
1. – Remove immediately:melted plastic, plastic foil, and food with sugar. If not, the dirt
can cause damage to the appliance. Use a special scraper for the glass . Put the
scraper on the glass surface at an acute angle and move the blade on the surface .
– Remove after the appliance is sufficiently cool:limescale rings , water rings, fat
stains, shiny metallic discolorations. Use a special cleaning agent for glass ceramic
or stainless steel.
2. Clean the appliance with a moist cloth and some detergent.
3. At the end rub the appliance dry with a clean cloth.
WARNING!
• Do not use the scraper or sharp objects to clean
the glass bar and the space between it and
glass ceramic. Glass bar is attached to the ce-
ramic plate.
• Do not put the pots on the glass bar.
• Make sure that the pans and pots do not touch
the glass bar.
WHAT TO DO IF...
You cannot activate the appli-
ance or operate it.
A sound operates when the ap-
pliance is deactivated.
The residual heat indicator does
not come on.
The heat setting changes be-
tween two heat settings.
A sound operates and appli-
ance activates and deactivates
again. After 5 seconds one
more sound operates.
DeluxeAppliances - EUappliances.com
Problem
• You touched 2 or more sensor fields at the same time. Only
• There is water or fat stains on the control panel. Clean the
• Activate the appliance again and set the heat setting in 7 sec-
• The child safety device or the lock or Stop+Go operates. See
You put something on one or more sensor fields. Remove the ob-
ject from the sensor fields.
The cooking zone is not hot because it operated only for a short
time. If the cooking zone must be hot, speak to the service centre.
The Power management is activated. See the section Power man-
agement.
You put something
Possible cause and remedy
touch one sensor field.
control panel
onds.
the chapter Operating the appliance.
. Remove the object from the sensor field.