Parameters/Address Space; Parameters - Siemens Simatic S7-1500 Manual

Parameters/address space

4.1

Parameters

DQ 8x230VAC/2A ST parameters
When you assign the module parameters in STEP 7, you use various parameters to specify
the module properties. The following table lists the configurable parameters. The effective
range of the configurable parameters depends on the type of configuration. The following
configurations are possible:
● Central operation with a S7-1500 CPU
● Distributed operation on PROFINET IO in an ET 200MP system
● Distributed operation on PROFIBUS DP in an ET 200MP system
For parameter assignment in the user program, the parameters are transferred to the
module using the WRREC instruction (parameter reassignment in RUN) and data records;
see chapter Parameter assignment and structure of the parameter data records (Page 26).
Table 4- 1 Configurable parameters and their defaults
Parameters Range of values
Diagnostics
Reaction to CPU
Turn off
•
STOP
Keep last value
•
Output substitute value 1
•
14
Default setting Parameter as-
signment in RUN
Turn off Yes
Digital output module DQ 8x230VAC/2A ST Triac (6ES7522-5FF00-0AB0)
Scope with configuration soft-
ware, e.g., STEP 7 (TIA Portal)
GSD file GSD file
PROFINET IO PROFIBUS DP
Channel Channel
Manual, 09/2016, A5E03485733-AD
4