Wiring
This section contains the block diagram of the module and outlines various wiring options.
You can find information on wiring the front connector, creating a cable shield, etc. in the
Wiring section of the system manual S7-1500/ET 200MP
(https://support.industry.siemens.com/cs/ww/en/view/59191792).
Note
Do not insert the potential jumpers included with the front connector!
Wiring and block diagram
The example in the following figure shows the terminal assignment and the assignment of
the channels.
①
Figure 3-1
Digital output module DQ 8x230VAC/2A ST Triac (6ES7522-5FF00-0AB0)
Manual, 09/2016, A5E03485733-AD
Backplane bus interface
Block diagram and terminal assignment
CHx
Channel or channel status LED (green/red)
RUN
Status display LED (green)
ERROR
Error display LED (red)
3
13