Operation - Measure/Supply Ma; Operation - Measure/Supply Volts Or Mv - GE Druck DPI 880 User Manual

Operation - Measure/supply mA

To measure/supply a current:
1. Connect the instrument (Figure 1, 2 or 3) and, if
necessary, adjust the Set Up (Table 1).
2. Select the task from the task selection menu
(Table 2/3).
Note: Use the Dual Function area ( ) to do two operations
at the same time. If the area
set this area to off ( ). This saves the battery power.
3. If necessary, adjust the Settings (Table 4/5) and/or the
output values to the system (Table 7).
Maximum: 30V
a) Measure
Figure 1: Example configuration - To measure/supply mA
with external loop power (Area
Figure 2: Example configuration - To supply mA with internal
loop power (Area
6
- [EN] English
selection is not necessary,
Edit Settings
b) Supply
)
Edit Settings
)
Maximum: 30V
a) with external loop
Figure 3: Example configuration - To measure mA (Dual
Function, area

Operation - Measure/supply Volts or mV

To measure/supply Volts or mV:
1. Connect the instrument (Figure 4/5) and, if necessary,
adjust the Set Up (Table 1).
2. Select the task from the task selection menu
(Table 2/3).
Note: Use the Dual Function area ( ) to do two operations
at the same time. If the area
set this area to off ( ). This saves the battery power.
3. If necessary, adjust the Settings (Table 4/5) and/or the
output values to the system (Table 7).
0 to ±30V OR
0 to ±120mV
Figure 4: Example configuration - To measure/supply Volts
or mV (Area
b) with internal loop
power power
)
selection is not necessary,
0 to 12V OR
0 to 120mV
Edit
b) Supply
a) Measure
)
K405 Issue 1
Settings