Philips VL3015LT Service Manual page 37

M
AINTENANCE
To Install or Replace Gobos
WARNING: Remove power from luminaire before performing maintenance. Gobos may be HOT
after operation. Allow to cool before replacing.
To replace a rotating gobo:
Step 1. Remove power from luminaire.
Step 2. As illustrated in
screws to access the three gobos wheels.
a. To access Wheel 1 and 3, remove bottom cover as shown in
b. To access Wheel 2, remove top cover as shown in
Gobo Wheel
02.96 98.001 0 0
P : G R
ROCEDURES OBO
Figure 2-3, remove top and/or bottom head cover by loosening four 1/4-turn
Figure 2-3: Head Covers - Removal
- G W
EPLACEMENT OBO
Figure 2-3.
Top Head Cover *
1/4-Turn Screw (4 per head cover)
* Head covers are attached by tethers.
2
1, 2, 3
HEELS AND
Figure 2-3.
Bottom Head Cover *
19