Philips Vari-lite VL3015LT User Manual
  1. Manuals
  2. Brands
  3. Philips Manuals
  4. Spotlight
  5. Vari-lite VL3015LT
  6. User manual

Philips Vari-lite VL3015LT User Manual

Spot luminaires
Hide thumbs Also See for Vari-lite VL3015LT:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Service Manual

Advertisement

Table of Contents
loading

Related Manuals for Philips Vari-lite VL3015LT

Summary of Contents for Philips Vari-lite VL3015LT

  • Page 2 Philips Vari-Lite assumes no responsibility or liability for any errors or inaccuracies that may appear in this manual. All information and graphics are property of Philips Vari-Lite, a Philips group company, 10911 Petal Street Dallas, Texas 75238 USA.
  • Page 3 OREWORD How To Obtain Warranty Service A copy of the Philips Vari-Lite Limited Warranty was included in the shipping package for this VARI❋LITE product. To obtain warranty service, please contact customer service at 1-877-VARI-LITE (1-877-827-4548), +1-214-647-7880, or entertainment.service@philips.com and request a Return Material Authorization (RMA) for warranty service.

  • Page 4: Declaration Of Conformity

    Philips Vari-Lite system, service, and safety guidelines, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his/her own expense.

  • Page 5: Safety Notice

    OREWORD Safety Notice It is extremely important to read ALL safety information and instructions provided in this manual and any accompanying documentation before installing and operating the products described herein. Heed all cautions and warnings during installation and use of this product. Safety symbols used throughout this manual are as follows: CAUTION advising of potential damage to product.
  • Page 6 ❋ VARI LITE VL3015LT S ’ UMINAIRE ANUAL WARNING: INSTRUCTIONS FOR CONTINUED PROTECTION AGAINST EXCESSIVE EXPOSURE TO UV RADIATION 1. Many VARI❋LITE luminaires use a lamp that produces UV radiation. DO NOT look directly at lamp. 2. It is hazardous to operate luminaires without lens or shield. Shields, lenses, or ultraviolet screens shall be changed if they have become visibly damaged to such an extent that their effectiveness is impaired.
  • Page 7 OREWORD Sicherheitshinweise Es ist äußerst wichtig, ALLE Sicherheitsinformationen und -hinweise in diesem Handbuch und dem beiliegenden Informationsmaterial zu lesen, bevor Sie die hierin beschriebenen Produkte installieren bzw. bedienen. Halten Sie bei der Installation und dem Einsatz dieses Produkts alle Warnhinweise und Vorsichtsmaßnahmen ein.
  • Page 8 ❋ VARI LITE VL3015LT S ’ UMINAIRE ANUAL WARNUNG: HINWEISE ZUM SCHUTZ GEGEN ÜBERHÖHTE UV-STRAHLUNG 1. Viele VARI❋LITE -Scheinwerfer verwenden die Lampentyp, der UV-Strahlen abgibt. SCHAUEN SIE NICHT direkt in die Lampe. 2. Es ist gefährlich, Leuchten ohne Linsen oder Blenden zu bedienen. Blenden, Linsen oder Ultraviolettschirme müssen ausgetauscht werden, sofern deren Schutzwirkung durch sichtbare Beschädigung (z.
  • Page 9 OREWORD Notes de sécurité Avant de procéder à l’installation des produits décrits dans ce guide et de les mettre en marche, il est extrêmement important de lire TOUS les renseignements et TOUTES les directives de sécurité contenues dans ce guide ainsi que toute documentation jointe. Tenir compte de tous les avertissements et suivre toutes les précautions pendant l’installation et l’utilisation de cet appareil.
  • Page 10 ❋ VARI LITE VL3015LT S ’ UMINAIRE ANUAL AVERTISSEMENT: DIRECTIVES POUR SE PROTÉGER CONTRE UNE EXPOSITION EXCESSIVE AUX RAYONS UV 1. Plusieurs luminaires VARI❋LITE utilisent une lampe qui produit des rayons UV. NE PAS fixer son regard sur la lampe. 2.
  • Page 11 OREWORD Aviso sobre Seguridad Es muy importante leer TODA la información e instrucciones sobre seguridad que se indica en este manual así como en los documentos adjuntos antes de instalar y operar los productos descritos. Se debe prestar atención a todos los avisos y advertencias durante la instalación y uso de este producto. Los símbolos de seguridad usados en este manual son los siguientes: CUIDADO, indica posibles daños al producto.
  • Page 12 ❋ VARI LITE VL3015LT S ’ UMINAIRE ANUAL ADVERTENCIA: INSTRUCCIONES PARA PROTECCIÓN CONTINUA CONTRA LA EXPOSICIÓN EXCESIVA DE RADIACIÓN ULTRA VIOLETA 1. Muchas luminarias VARI❋LITE usan un tipo de lámpara que produce radiación UV. NO mire directamente a la lámpara. 2.
  • Page 13 OREWORD 02.96 98.000 2 0 1 3 Dec emb er 2 012...
  • Page 14 ❋ VARI LITE VL3015LT S ’ UMINAIRE ANUAL 1 3 Dec emb er 2 012 02 .9 698.00 02 0...

  • Page 15: Table Of Contents

    ABLE OF ONTENTS Introduction About This Manual ...................... 1 Additional Documentation................... 1 Text Conventions ......................2 Customer Service......................2 Chapter 1. Description Features VL3015LT Spot Standard Features ................4 Components Included Items ......................5 Replacement Items/Accessories .................. 6 Luminaire Overview....................7 Chapter 2.
  • Page 16 ❋ VARI LITE VL3015LT S ’ UMINAIRE ANUAL Gobo Wheels 1, 2, and 3 ..................30 Index and Rotation ....................32 VL3015LT Spot Luminaire Timing VL3015LT Spot Timing Channel Information ............34 Updating Software USB Download and Programming ................42 Transferring Software From Luminaire to Luminaire..........

  • Page 17: About This Manual

    900W, 1200W or 1650W - mode selectable from fixture or console) Additional Documentation A service manual, only for Authorized Philips VARI❋LITE Service Centers and technicians, of the VL3015LT Spot Luminaire is available in electronic (PDF) format: • Luminaire Service Manual (02.9698.0010) •...

  • Page 18: Text Conventions

    Customer Service Our Goal At Philips Vari-Lite, we are committed to providing you the highest quality in customer service. Our comprehensive resources are available to help your business succeed and ensure you get the full benefit of being a Philips Vari-Lite customer. Whether your needs are telephone troubleshooting assistance, product training or technical service, our full-time staff of experienced professionals is on- hand to provide support.

  • Page 19: Chapter 1. Description

    HAPTER Description This chapter contains descriptions of luminaire features and components, along with a list of accessories which are available. • Features • Components 02.96 98.000 2 0 1 3 De cemb er 2012...

  • Page 20: Features

    ❋ VARI LITE VL3015LT S ’ UMINAIRE ANUAL Features VL3015LT Spot Standard Features The VL3015LT Spot Luminaire has the following standard features: • 10:1 zoom optics system with 6° to 60° range. • CMY color mixing system. • Two fixed color wheels with five interchangeable color filters each capable of continuous wheel rotation for additional effects.

  • Page 21: Components

    ESCRIPTION OMPONENTS Components Included Items The following illustration shows all items included with the luminaire: VL3015LT Spot Luminaire Documentation CD ROM Product Registration Product Support Sheet VL3015LT Spot Luminaire Unpack & Quick Start Guide Warranty Card 1500 Watt Short Arc Double-Ended Lamp* Neutrik PowerCon®...

  • Page 22: Replacement Items/Accessories

    VARI LITE VL3015LT S ’ UMINAIRE ANUAL Replacement Items/Accessories The following optional and/or replacement items can be ordered directly from your Authorized Philips Vari-Lite Dealer. (Please order by Philips Vari-Lite part number.) Philips Vari-Lite Accessory Description Part Number 22.9620.0194 Safety Cable Assembly ❋...

  • Page 23: Luminaire Overview

    ESCRIPTION OMPONENTS Luminaire Overview The following illustration shows the external luminaire components and controls. Mounting Brackets Upper Enclosure Assembly Note: Truss hooks, clamps, Houses power supply, ballast, etc. are sold separately. and display board. Input Panel Provides DMX In and Thru, Backcap Assembly and AC Power connections.
  • Page 24 ❋ VARI LITE VL3015LT S ’ UMINAIRE ANUAL Notes 1 3 Dec emb er 2 012 02 .9 698.00 02 0...

  • Page 25: Chapter 2. Installation

    HAPTER Installation This chapter contains instructions for installation of the luminaire. It includes connecting power and data, along with instructions for powering up the luminaire for the first time and addressing it within your system. • Special Warnings • Power and Data Cabling Requirements •...

  • Page 26: Special Warnings

    The following lamps are approved for use: Osram SharXS® HTI® 1500 W/D7/60 metal halide lamp (shipped with units), Philips / MSR 1510 Gold™ SA/DE Lamp, or GE CSR 1500/S/DE/60 96800 Lamp. Installing any other lamp types can be hazardous. Dispose of used lamps properly. Users can check the latest version of Vari-Lite Technical Notice TN-248, on the Vari-Lite web site, for all approved lamps.

  • Page 27: Power And Data Cabling Requirements

    NSTALLATION OWER AND ABLING EQUIREMENTS Power and Data Cabling Requirements Power The luminaire requires standard AC power distribution from 200-240 VAC, 50/60 Hz. Current required is up to 12 Amps depending on the AC supply voltage and product model. Note: The mating Neutrik PowerCon connector is supplied, however, you will need to purchase or construct a cable appropriate for your application.
  • Page 28 ❋ VARI LITE VL3015LT S ’ UMINAIRE ANUAL For single-phase power at 200-240 volts RMS: Connection AC Neutral AC Line Ground (Earth) For three-phase power at 208 volts RMS: Connection Phase 1 Phase 2 Ground (Earth) WARNING: It is not recommended to power any VARI❋LITE luminaire from a dimmer - even in 'NONDIM' mode.

  • Page 29: Data Cables

    NSTALLATION OWER AND ABLING EQUIREMENTS Data Cables The VL3015LT Spot Luminaire is equipped with two, 5-pin XLR connectors for DATA IN and DATA THRU (out) applications. DATA IN requires a 5-pin, female XLR connector and DATA THRU requires a 5-pin, male XLR connector. When purchasing or constructing data cables, it is important that not only the correct cable type be used, but also quality cable to ensure a reliable DMX512 system.

  • Page 30: Recommended Cable Types/Manufacturers

    5-pin, male XLR connector. • Two 1/4W 5% 120 ohm resistors. Note: A DMX termination connector assembly is available as an accessory from Philips Vari-Lite. “Replacement Items/Accessories” on page 1 3 Dec emb er 2 012 02 .9 698.00 02 0...

  • Page 31: Installation Procedures

    NSTALLATION NSTALLATION ROCEDURES Installation Procedures Hanging the Luminaire The VL3015LT Spot Luminaire can be hung horizontally or vertically from any structure designed to work with the type of load created by this moving luminaire. Two mounting bracket assemblies (provided) are used to attach truss hooks or other mounting hardware as required. Many compatible truss hooks are available from different manufacturers for your particular needs.
  • Page 32 ❋ VARI LITE VL3015LT S ’ UMINAIRE ANUAL WARNING: Ensure that the bracket locking mechanism is fully seated after the bracket is installed on the luminaire. Truss Hook Bracket* Locking Mechanism Keyed Hole Press up when installing or releasing Raised Mounting Button *IMPORTANT! Face brackets in same direction for all configurations.
  • Page 33 NSTALLATION NSTALLATION ROCEDURES Installing in Truss: Step 1. Using two people, lift luminaire into mounting position. Step 2. Secure in place with truss hook. Ensure truss hook hardware that locks hook in place (e.g. wing bolt) is properly tightened and that luminaire is fully supported. Step 3.

  • Page 34: Floor Mounting The Luminaire

    ❋ VARI LITE VL3015LT S ’ UMINAIRE ANUAL Floor Mounting the Luminaire The luminaire enclosure is sufficient to stabilize the luminaire in a floor installation, provided that the mounting surface is flat and sturdy. Luminaire Enclosure WARNING: Light Beam Projects Intense Heat. Do not illuminate objects within 4.0 m (13.2 feet) of the VL3015LT Spot Luminaire.

  • Page 35: Powering Up

    NSTALLATION OWERING Powering Up Power Up and Configuration Procedure Since Lamp On is the default state, the lamp will strike when the luminaire is powered up for the first time when AC input power cable is connected and power is applied, the luminaire will immediately begin a calibration sequence that steps it through pan and tilt movements.

  • Page 36: Addressing

    ❋ VARI LITE VL3015LT S ’ UMINAIRE ANUAL Addressing Program Starting Address The address setting for DMX console controlled systems is entered using the Menu Display (refer to “Menu Operation” on page 46). The luminaire retains the DMX address even if power is removed. Note: Refer to your console operating instructions for specific information regarding its addressing requirements.

  • Page 37: Chapter 3. Operation

    HAPTER Operation This chapter contains instructions for operating the luminaire using DMX control and for updating the internal software. • VL3015LT Spot DMX Channels • VL3015LT Spot DMX Mapping • VL3015LT Spot Luminaire Timing • Updating Software 02.96 98.000 2 0 1 3 De cemb er 2012...

  • Page 38: Vl3015Lt Spot Dmx Channels

    ❋ VARI LITE VL3015LT S ’ UMINAIRE ANUAL VL3015LT Spot DMX Channels VL3015LT Spot Channel Mapping These tables assume a DMX start address of 1. When a different starting address is used, this address becomes channel 1 function and other functions follow in sequence. Table 1: VL3015LT Spot DMX Channel Mapping DMX Channel Parameters...
  • Page 39 : VL3015LT S DMX C PERATION HANNELS Table 1: VL3015LT Spot DMX Channel Mapping DMX Channel Parameters Range (DMX) Range (%) Default Value Description Controls Rotating Gobo Wheel 1 using the following DMX values. Half gobo positioning not possible. Position 1 = Open (Indx) DMX = 0 - 10 Position 2 = Alpha Rays (Indx) DMX = 11 - 32 Position 3 = Night Sky (Indx) DMX = 33 - 54 Position 4 = Five Ray (Indx) DMX = 55 - 75...
  • Page 40 ❋ VARI LITE VL3015LT S ’ UMINAIRE ANUAL Table 1: VL3015LT Spot DMX Channel Mapping DMX Channel Parameters Range (DMX) Range (%) Default Value Description Inserts Prism into beam for prism effects. Open (Out of Beam) DMX = 0 - 3 Prism 0 - 255 0 - 100%...
  • Page 41 : VL3015LT S DMX C PERATION HANNELS change as a snap. A zero value will give the fastest move but without any smoothing, this can look steppy in console-timed moves. • To use a timing channel instead of console timing it is necessary to set the timing channel to the desired value and set cue and/or parameter time to zero.

  • Page 42: Vl3015Lt Spot Control Channel Functions

    ❋ VARI LITE VL3015LT S ’ UMINAIRE ANUAL VL3015LT Spot Control Channel Functions Control channel functions allow special actions such as reset, lamp on/off and partial recalibration. These must be executed with zero time transition or with timing disabled. Discrete values must be used;...

  • Page 43: Vl3015Lt Spot Dmx Mapping

    : VL3015LT S DMX M PERATION APPING VL3015LT Spot DMX Mapping VL3015LT Spot Color Control The luminaire’s color system is composed of a CMY color mixing mechanism and two fixed color wheels. The follow sections describe these components. Color Mixing The color mixing mechanism is made up of four graduated color disks: cyan, magenta, yellow and CTO (color temperature orange).

  • Page 44: Fixed Color Wheel 2

    ❋ VARI LITE VL3015LT S ’ UMINAIRE ANUAL Table 3-3: VL3015LT Spot Fixed Color Wheel 1 Standard Configuration Chart Position Color Filter Part Number 41.9686.0490 Yellow 41.9686.0491 Magenta 41.9686.0492 Kelly Green 41.9686.0493 Congo Blue 41.9686.0494 Fixed Color Wheel 2 Fixed color wheel 2, like fixed color wheel 1, offers timed changes, half and full frame positions, and various spin rates in either direction.

  • Page 45: Fixed Color Wheels Dmx Map

    : VL3015LT S DMX M PERATION APPING Fixed Color Wheels DMX Map Table 3-5: VL3015LT Spot DMX Map for Fixed Color Wheels 1 and 2 DMX Channel Parameters Range (DMX) Range (%) Default Value Description Controls Fixed color wheel 1. Linear control from 0 to 216.

  • Page 46: Range

    ❋ VARI LITE VL3015LT S ’ UMINAIRE ANUAL Range The Range channel is used to fine tune the focus range of the fixture. If the image can not be made sharp after adjusting the edge and zoom, adjust the range channel to gain sharpness of the image.
  • Page 47 : VL3015LT S DMX M PERATION APPING Table 3-8: VL3015LT Spot Gobo Wheel 1 Standard Configuration Chart Position Gobo Style Part Number Open No Gobo (N/A) Alpha Rays 41.6098.7029 Night Sky 41.6098.5011 41.6098.4003 Block Break-Up 41.6098.7015 Note: Raw artwork shown for gobos and gags is for reference only.

  • Page 48: Index And Rotation

    ❋ VARI LITE VL3015LT S ’ UMINAIRE ANUAL Table 3-10: VL3015LT Spot Gobo Wheel 3 Standard Configuration Chart Position Gobo Style Part Number Open No Gobo (N/A) Circle of Ovals 41.6098.6011 Multi-Color Circles 41.6098.8801 Pebbles 41.6098.7002 Uneven Bars 41.6098.4211 Note: Raw artwork shown for gobos and gags is for reference only.
  • Page 49 : VL3015LT S DMX M PERATION APPING Table 3-11: VL3015LT Spot DMX Map for Gobo Wheel 1, 2 and 3 Controls Rotating Gobo Wheel 2 using the following DMX values. Half gobo positioning not possible. Position 1 = Open (Indx) DMX = 0 - 10 Position 2 = Plowed (Indx) DMX = 11 - 32 Position 3 = Droplets (Indx) DMX = 33 - 54 Position 4 = On The Rocks (Indx) DMX = 55 - 75...

  • Page 50: Vl3015Lt Spot Luminaire Timing

    ❋ VARI LITE VL3015LT S ’ UMINAIRE ANUAL VL3015LT Spot Luminaire Timing VL3015LT Spot Timing Channel Information Timing channel control improves the timed moves of certain groups of parameters. We provide up to four timing channels - Focus (pan and tilt), Color Time (color parameters), Beam Time (beam parameters), and Gobo Time (gobo wheel operation).
  • Page 51 : VL3015LT S PERATION UMINAIRE IMING A timing value of zero is full speed. A time value of 100% (or DMX 255) enables the associated parameter(s) to follow cue fade time (console time) rather than the timing channel. Note: The particular storing syntax for your console, as well as instructions on how to write part cues, can be found in the operation manual for that console.
  • Page 52 ❋ VARI LITE VL3015LT S ’ UMINAIRE ANUAL Timing Channels Map Table 3-13: (Continued) % Value = Seconds 10.2 10.4 10.6 1 3 Dec emb er 2 012 02 .9 698.00 02 0...
  • Page 53 : VL3015LT S PERATION UMINAIRE IMING Timing Channels Map Table 3-13: (Continued) % Value = Seconds 02.96 98.000 2 0 1 3 Dec emb er 2 012...
  • Page 54 ❋ VARI LITE VL3015LT S ’ UMINAIRE ANUAL Timing Channels Map Table 3-13: (Continued) % Value = Seconds 1 3 Dec emb er 2 012 02 .9 698.00 02 0...
  • Page 55 : VL3015LT S PERATION UMINAIRE IMING Timing Channels Map Table 3-13: (Continued) % Value = Seconds 02.96 98.000 2 0 1 3 Dec emb er 2 012...
  • Page 56 ❋ VARI LITE VL3015LT S ’ UMINAIRE ANUAL Timing Channels Map Table 3-13: (Continued) % Value = Seconds 1 3 Dec emb er 2 012 02 .9 698.00 02 0...
  • Page 57 : VL3015LT S PERATION UMINAIRE IMING Timing Channels Map Table 3-13: (Continued) % Value = Seconds Follows Cue Data 02.96 98.000 2 0 1 3 Dec emb er 2 012...

  • Page 58: Updating Software

    ❋ VARI LITE VL3015LT S ’ UMINAIRE ANUAL Updating Software USB Download and Programming To download files with a PC equipped with a Universal Serial Bus (USB) port, you need the VARI❋LITE USB Luminaire Programming Kit (28.8500.0054). The USB Luminaire Programming Kit can be ordered directly from your Authorized VARI❋LITE Dealer.

  • Page 59: Transferring Software From Luminaire To Luminaire

    PERATION PDATING OFTWARE Lists specific versions of downloaded software (on PC) Device Connection Status and USB Downloader Controls Click to download specific software version to connected luminaire(s) Click logo to go to Vari-Lite web site (internet connection required) Download History Will show current progress of download Figure 3-4: VL Download Program Window...
  • Page 60 ❋ VARI LITE VL3015LT S ’ UMINAIRE ANUAL A DMX termination connector is used in this process. Refer to page 14 for more information regarding the construction of this connector. Master luminaire containing Luminaire 1 Luminaire 2 software version to download requiring update requiring update ...

  • Page 61: Menu System

    HAPTER Menu System This chapter contains instructions for operating the luminaire using the Menu Display feature. • Menu Operation • Menu Functions • Self-Tests 02.96 98.000 2 0 1 3 De cemb er 2012...

  • Page 62: Chapter 4. Menu System

    ❋ VARI LITE VL3015LT S ’ UMINAIRE ANUAL Menu Operation What Is the Menu System? The menu system is a programmable set of commands used to configure, address, operate, and test the luminaire. The menu system is controlled at the Menu Display available at the enclosure input panel. Menu Display ...

  • Page 63: Default State

    YSTEM PERATION To enter the menu system, first press [Menu]. The functions displayed will be 1st level functions. Scroll through the 1st level functions by pressing [Up] / [Down] arrows. Once the desired function appears in the display, press [Enter]. You are now at the 2nd level. Once again, press the [Up] / [Down] arrows to scroll through 2nd level functions.

  • Page 64: Menu Functions

    ❋ VARI LITE VL3015LT S ’ UMINAIRE ANUAL Menu Functions VL3015LT Spot Menu System Overview The following is a graphic representation of the entire menu system. Address - value (1 thru 512) Manual XXXXX (value) Tilt XXXXX (value) Dimmer XXXXX (value) Setup Normal Strobe...

  • Page 65: Vl3015Lt Spot Menu System Function Chart

    YSTEM UNCTIONS VL3015LT Spot Menu System Function Chart The following is a detailed look at the internal menu system. Table 4-1: VL3015LT Spot Menu System Chart 1st Level 2nd Level 3rd Level 4th Level 5thLevel Address XXX Address value Setup Normal Normal Operational Luminaire Mode...
  • Page 66 ❋ VARI LITE VL3015LT S ’ UMINAIRE ANUAL Table 4-1: VL3015LT Spot Menu System Chart 1st Level 2nd Level 3rd Level 4th Level 5thLevel DATA Channel XXX DMX Channel (1 XXXX Current DMX DMX Data through 36) Value for selected channel Pan/Tilt Pan and Tilt Swap Swap Pan &...
  • Page 67 YSTEM UNCTIONS Table 4-1: VL3015LT Spot Menu System Chart 1st Level 2nd Level 3rd Level 4th Level 5thLevel Test All Seq Test All RUN TEST Run-Test in Progress Press [Menu] to mechanisms - sequence stop tests through each mechanism Pan/Tilt RUN TEST Run-Test in Progress RUN TEST Run-Test in Progress Tilt...

  • Page 68: Menu Function Definitions

    ❋ VARI LITE VL3015LT S ’ UMINAIRE ANUAL Menu Function Definitions For easy reference, each possible menu item is listed alphabetically in the first column by its display abbreviation. The second column follows with a definition of the abbreviation and then a third column provides an explanation of its purpose and function.
  • Page 69 YSTEM UNCTIONS Table 4-2: Menu Function Definitions (Continued) Display Definition Purpose Lamp Lamp Accesses lamp power-up options, reset and information ( Config ) or presets the Zoom and Edge to a specific setting for Lamp adjustment ( Test ). Lamp OFF Lamp is Off Configures arc luminaire so that lamp will not strike upon power up.

  • Page 70: Self-Tests

    ❋ VARI LITE VL3015LT S ’ UMINAIRE ANUAL Self-Tests Running Parameter Tests The luminaire is capable of running self-tests by using the Test menu functions. When running tests on multiple luminaires, a DMX termination connector is required at the last luminaire in the link.
  • Page 71 YSTEM ESTS Movement Disable The Movement option allows pan and tilt to be disabled so that the luminaire can be placed in any position for testing without movement occurring. In order to regain full control of the luminaire, Movement will need to be enabled after testing. Note: When using the Movement option, pan and tilt will be disabled for all the luminaires that are linked.
  • Page 72 ❋ VARI LITE VL3015LT S ’ UMINAIRE ANUAL Notes 1 3 Dec emb er 2 012 02 .9 698.00 02 0...

  • Page 73: Appendix A. Luminaire Care And Routine Maintenance

    PPENDIX Luminaire Care and Routine Maintenance This appendix provides instructions for troubleshooting and routine maintenance which may be necessary during the life of the luminaire. • Equipment Handling • Troubleshooting • Routine Maintenance WARNING: All maintenance procedures are to be performed with power removed from the luminaire.

  • Page 74: Equipment Handling

    ❋ VARI LITE VL3015LT S ’ UMINAIRE ANUAL Equipment Handling Below are some basic tips and information on handling luminaires and their associated components. Locations/Use VARI❋LITE luminaires are designed for dry locations only. Exposure to rain or moisture (including, but not limited to, fog machines, misters, etc.,) may damage luminaire. Lamps Servicing •...

  • Page 75: Solid State Electronics

    ROUBLESHOOTING AND AINTENANCE compounds is greater around the top electrode than the bottom electrode. In addition, the fill components that are difficult to vaporize congeal around the bottom electrode, thereby reducing lamp life. Solid State Electronics Electrostatic Discharge (ESD) Electrostatic discharge (ESD) presents a significant danger to solid state electronic components (semiconductor devices and PC board assemblies).

  • Page 76: Troubleshooting

    ❋ VARI LITE VL3015LT S ’ UMINAIRE ANUAL Troubleshooting Error Messages If a problem occurs during luminaire calibration, at the end of the calibration sequence the Menu Display will cycle through any applicable error message(s) until the end of the list is reached. To review the error messages again, it will be necessary to access them using the Status function.

  • Page 77: Troubleshooting Guide

    ROUBLESHOOTING AND AINTENANCE Troubleshooting Guide If a problem is suspected, first try recalibrating the luminaire to prompt an error message. The chart below provides possible causes and remedies for various error messages and/or symptoms. Table A-2: Troubleshooting Chart Message Symptom Description Possible Cause/Remedy Lamp...

  • Page 78: Routine Maintenance

    ❋ VARI LITE VL3015LT S ’ UMINAIRE ANUAL Routine Maintenance Lamp Replacement WARNING: Ensure that power is removed from luminaire when installing lamp. CAUTION: Wear cotton gloves or other covering while installing lamp. Touching lamp glass with bare fingers will leave oil and may cause the lamp to explode or reduce lamp life. If touched, use alcohol and cotton cloth to thoroughly clean glass portion of lamp.

  • Page 79: Align Lamp

    ROUBLESHOOTING AND AINTENANCE Align Lamp The design of the VL3015LT Spot Luminaire optical system allows for a flat or peaked field. A flat field is one where there is no detectable hot spot and a peaked field is one where the intensity of the beam is greater at the center of the beam than at the perimeter.

  • Page 80: Gobo Replacement - Gobo Wheels

    ❋ VARI LITE VL3015LT S ’ UMINAIRE ANUAL Gobo Replacement - Gobo Wheels Tools: #2 Phillips screwdriver WARNING: Remove power from luminaire before performing maintenance. Gobos may be HOT after operation. Allow to cool before replacing. To replace a rotating gobo: Step 1.
  • Page 81 ROUBLESHOOTING AND AINTENANCE Top Head Cover * 1/4-Turn Screw (4 per head cover) Gobo Wheel (see detail) Bottom Head Cover * * Head covers are attached by tethers. Do not touch glass with bare fingers. CAUTION: Press on gobo carrier only. OTATING HEELS Front of luminaire...

  • Page 82: Fixed Color Filter Replacement

    ❋ VARI LITE VL3015LT S ’ UMINAIRE ANUAL Fixed Color Filter Replacement Tools: #2 Phillips screwdriver WARNING: Remove power from luminaire before performing maintenance. Filters may be HOT after operation. Allow to cool before replacing. To replace a fixed color filter on Color Wheel 1 (closest to the lamp): Step 1.
  • Page 83 ROUBLESHOOTING AND AINTENANCE Fixed Color Filter Replacement (continued) Step 6. Orienting coated side of filter towards lamp, slide new filter under the spring clip until it is securely retained by the lock pins. Step 7. Replace the head cover. Top Head Cover * 1/4-Turn Screw Color Wheel (see detail)

  • Page 84: Cleaning Optics, Filters And Gobos

    ❋ VARI LITE VL3015LT S ’ UMINAIRE ANUAL Cleaning Optics, Filters and Gobos WARNING: Remove power from luminaire before performing maintenance. WARNING: Acetone is a harsh cleaning agent and solvent. Acetone is very flammable. Please handle acetone according to manufacturer’s safety instructions and precautions. The front lens, optics/color filters, and reflector may require cleaning after extended use.

  • Page 85: Appendix A. Technical Specifications

    PPENDIX Technical Specifications VL3015LT Spot Luminaire PROGRAMMABLE FUNCTIONS Color System Six color control wheels total. A three filter CMY cross fading system, two fixed color wheels with five interchangeable color filters each capable of continuous wheel rotation for additional effects, and a variable CTO color temperature correction wheel. Zoom Optics A 13-element 10:1 zoom optics system, covering a range from 6°...
  • Page 86 ❋ VARI LITE - VL3015LT S ’ UMINAIRE ANUAL OPTICAL Source Triple wattage, double-ended lamp. The lamp is capable of operation at 900W, 1200W or 1650W - mode selectable from fixture or console. Color Temperature 6000K at 1650W and 6300K at 900W and 1200W Output 42,487 lumens Reflector...
  • Page 87 ECHNICAL PECIFICATIONS Dimensions Hangs on 31.0 inch (79 cm) centers. Luminaire can be mounted and operated in any orientation. 21.7 in / 16.7 in / 551.2 mm 424.2 mm 150.3 150.3 40.7 in / 1033.8 mm 6.1 in / 155.0 mm 19.2 in / 18.0 in / 487.7 mm...
  • Page 88 ❋ VARI LITE - VL3015LT S ’ UMINAIRE ANUAL PHOTOMETRIC 1500W Short Arc Lamp FIELD Zoom Lens CENTER BEAM CENTER BEAM TOTAL FIELD ANGLE DIAMETER Position CANDELA FOOT-CANDLE LUMENS (degrees) NFOV 1,619,083 5,168 24,097 0.1107 MFOV 555,807 11,343 38,251 25.7 0.4545 WFOV 109,368...
  • Page 90 Philips Vari-Lite 10911 Petal Street Dallas, Texas 75238 USA 1-877-VARI-LITE . 1-214-647-7880 www.vari-lite.com. 2012 Philips Vari-Lite, a Philips group company. All Rights Reserved. ©...

Table of Contents