Connection Of Mfc 300 / Mfc 400 - KROHNE OPTICHECK Handbook

OPTICHECK

4.5.1 Connection of MFC 300 / MFC 400

Mass flowmeters equipped with MFC 300 and MFC 400 signal converters can be verified with
OPTICHECK in the following versions:
• Compact version (the signal converter is mounted directly on the flow sensor)
• Field version (electrical connection to the flow sensor via signal cable)
• Wall version (electrical connection to the flow sensor via signal cable) – MFC 300 only
• 19" rack-mounted housing (only level 0/1 tests are supported) – MFC 300 only
Figure 4-37: MFC 300 – available versions
1 Compact version
2 Flow sensor with connection box
3 Field housing
4 Wall-mounted housing
5 19" rack-mounted housing
The following combinations of MFC 300 signal converters and flow sensors can be verified with
OPTICHECK:
Flow sensor
OPTIMASS 1000
OPTIMASS 2000
OPTIMASS 3000
OPTIMASS 7000
OPTIMASS 8000
* Please contact your local KROHNE service for further information!
04/2017 - 4003706304 - MA OPTICHECK R04 en
Flow sensor + signal converter MFC 300
Compact Remote field
housing
OPTIMASS 1300 C OPTIMASS 1300 F
OPTIMASS 2300 C OPTIMASS 2300 F
OPTIMASS 3300 C OPTIMASS 3300 F
OPTIMASS 7300 C OPTIMASS 7300 F
OPTIMASS 8300 C OPTIMASS 8300 F
www.krohne.com
ELECTRICAL CONNECTIONS
Remote wall-
mounted housing
OPTIMASS 1300 W
OPTIMASS 2300 W
OPTIMASS 3300 W
OPTIMASS 7300 W
OPTIMASS 8300 W
4
Remote rack-
mounted housing
(28 TE)*
OPTIMASS 1300 R/L
OPTIMASS 2300 R/L
OPTIMASS 3300 R/L
OPTIMASS 7300 R/L
OPTIMASS 8300 R/L
53