Navigation - Traffic Information - Volvo SENSUS NAVIGATION Manual

TRAFFIC INFORMATION
Navigation – traffic information
The navigation system constantly receives upda-
ted traffic information, which is used for dynamic
guidance. When situations occur that may cause
delays (e.g., an accident, road work), this will be
displayed on the screen. If a destination has
been set, the route to it will be recalculated,
which can occur automatically or require confir-
mation, see Rerouting on request (p. 27).
TMC is a standardized system for broadcasting
traffic information. The vehicle's radio automati-
cally tunes to the correct frequency.
Traffic information is displayed differently
depending on whether or not a destination has
been set.
This symbol indicates that traf-
fic information is available in
the current broadcast area and
will displayed in two colors
depending on the importance
of the information:
•
RED: the information will be read aloud and
the location of the problem will be shown on
the map.
•
YELLOW: the information will not be read
aloud but the location of the problem will be
shown on the map.
36
This symbol marks the location
of a traffic problem. For more
information, see "Traffic infor-
mation on the map" below.
NOTE
Traffic information is not available in all areas.
Traffic information coverage is being
increased continuously.
Activating/deactivating
1. In the navigation system's normal view, press
the thumb wheel/OK/MENU and select
Traffic information .
2. Check/uncheck the box to activate/deacti-
vate the function.
Traffic information without a set
destination
This function makes it possible to show traffic
problems in situations where no destination has
been set.
Scroll function on the map opens
Traffic information on the map
1. In the navigation system's normal view, press
the thumb wheel/OK/MENU and select
Traffic information Traffic on
2. Search for traffic problems using the scroll
function, see also "Traffic information with a
set destination" below.
All traffic
1. In the navigation system's normal view, press
the thumb wheel/OK/MENU and select
Traffic information Traffic on
> A list of all traffic announcements in the
current broadcast area will be displayed.
2. Select what is to be displayed, see also
"Traffic information with a set destination" >
"All traffic."
map.
map.