Volvo SENSUS NAVIGATION Manual page 21

5. Set the address as an intermediate destina-
tion or a single destination:
•
Add as waypoint : adds the address as
an intermediate destination (waypoint) to
the itinerary.
•
Set single destination : deletes any pre-
vious destinations in an itinerary and
starts guidance to the selected destina-
tion.
Setting a destination using a point of
interest (POI)
A point of interest is a general name for tourist
attractions or facilities such as hotels, gas sta-
tions, etc.
The map database contains a large number of
searchable POIs that can be selected as destina-
3
tions .
1. In the navigation system's normal view, press
the thumb wheel/OK/MENU and select
Set destination Point of interest
To select a POI on the map, see Points of interest (POIs) on the map (p. 29)
3
2. Search for a POI in the following ways:
•
By name : displays the text wheel to
search for the name of a POI, e.g.,
"Peppe's". The entire map area will be
included in the search. See also Map and
system information(p. 42).
•
By category
specific categories (e.g., bank/hotel/
museum).
•
Near the car
vehicle's current location.
•
Along the route
along the current itinerary.
•
Near the destination
near the destination.
•
Around point on map
POIs by scrolling with the cursor.
For additional information about the destina-
tion, select Information
of information desired.
(POI).
3. To store the address in the system's memory,
Save
select followed by
Home .
SETTING A DESTINATION, ITINERARY AND ROUTE
: limits the POI search to
: searches for POIs near the
: searches for POIs
: searches for POIs
: searches for
followed by the type
Stored location
or
4. Set the address as an intermediate destina-
tion or a single destination:
•
Add as waypoint : adds the address as
an intermediate destination (waypoint) to
the itinerary.
•
Set single destination : deletes any pre-
vious destinations in an itinerary and
starts guidance to the selected destina-
tion.
Setting a destination using a stored
location
This function is a collection of destinations that
have been stored using the menu alternative
Save Stored location.
Please note that one or more destinations has to
have been previously stored.
1. In the navigation system's normal view, press
the thumb wheel/OK/MENU and select
Set destination Stored location.
}}
19