Volvo SENSUS NAVIGATION Manual page 32

Hide thumbs Also See for SENSUS NAVIGATION:
Table of Contents

Advertisement

SETTING A DESTINATION, ITINERARY AND ROUTE
||
Map type
1. In the navigation system's normal view, press
the thumb wheel/OK/MENU and select
Settings
Map options
2. Select how the map is to be displayed on the
screen:
North up
: the map will always have north
at the top of the screen. The "vehicle"
symbol will move in the current direction
on the screen.
Map heading up
: the "vehicle" symbol
will be at the center of the map and will
always point upward. The map will rotate
under the symbol, depending on the
direction of the road.
3D map basic
: the map will be displayed
at an angle from above and the "vehicle"
symbol will be at the center of the map
and will always point upward.
3D map enhanced
map basic but with objects such as build-
ings, etc. displayed on the map.
Highway information
1. In the navigation system's normal view, press
the thumb wheel/OK/MENU and select
Settings
Map options
information.
30
2. Select a function:
Map
type.
Information about the current location
1. In the navigation system's normal view, press
the thumb wheel/OK/MENU and select
Settings
information.
2. Select the type of information to be dis-
played:
: the same as 3D
Compass
The direction in which you are driving will dis-
played as a compass pointer or with letters.
Highway
Checked box: If you are driving on a high-
way, the next 3 exits will be displayed, e.g.,
exits where there are rest areas or gas
stations. The list is sorted so that the
nearest exit is at the bottom of the list.
Empty box: the function is deactivated.
Map options
Position
Current road
: the name of the road
where you are driving/cursor is pointing is
displayed.
Lat/Long
: the location's co-ordinates
where you are driving/cursor is pointing is
displayed.
None
: No information will be displayed.
The compass needle's red
pointer points to the north. A
text-based compass can also
be selected.
1. In the navigation system's normal view, press
the thumb wheel/OK/MENU and select
Settings
Map options
2. Select to display the compass needle or let-
ters:
Graphic
: a compass needle symbol indi-
cates the compass heading.
Text
: the letters N (north), W (west), S
(south) or E (east) indicate the compass
heading.
Set the map orientation (north or direction
toward the top of the screen). See also the
previous section "Compass."
Compass.

Advertisement

Table of Contents
loading

Table of Contents