Volvo SENSUS NAVIGATION Manual page 22

SETTING A DESTINATION, ITINERARY AND ROUTE
||
2. Open the stored destination:
•
Routes : e.g., recorded sections of the
route.
•
Other : e.g., stored locations.
For additional information about the destina-
Information
tion, select
of information desired.
It is also possible to delete or edit a stored
destination by selecting
Delete all .
3. Set the address as an intermediate destina-
tion or a single destination:
•
Add as waypoint
: adds the address as
an intermediate destination (waypoint) to
the itinerary.
•
Set single destination
vious destinations in an itinerary and
starts guidance to the selected destina-
tion.
Setting a destination using a previous
destination
1. In the navigation system's normal view, press
the thumb wheel/OK/MENU and select
Set destination Previous
20
2. Select a destination from the list.
For additional information about the destina-
tion, select
of information desired.
A destination can also be deleted by select-
ing
followed by the type
3. Set the address as an intermediate destina-
tion or a single destination:
Edit , Delete or
•
•
Setting a destination using an Internet
: deletes any pre-
search
An Internet connection is required, see the
owner's information.
1. In the navigation system's normal view, press
the thumb wheel/OK/MENU and select
Set destination
2. Follow the instructions on the screen.
destination.
Setting a destination using a zip code
1. In the navigation system's normal view, press
the thumb wheel/OK/MENU and select
Set destination
Information followed by the type
Delete Delete all
or .
Add as waypoint : adds the address as
an intermediate destination (waypoint) to
the itinerary.
Set single destination : deletes any pre-
vious destinations in an itinerary and
starts guidance to the selected destina-
tion.
Internet search.
Zip code.
2. Enter the zip code and the country if neces-
sary.
For additional information about the destina-
tion, select Information followed by the type
of information desired.
3. To store an address in the system's memory,
select Save followed by Stored location
Home
.
4. Set the address as an intermediate destina-
tion or a single destination:
•
Add as waypoint : adds the address as
an intermediate destination (waypoint) to
the itinerary.
•
Set single destination : deletes any pre-
vious destinations in an itinerary and
starts guidance to the selected destina-
tion.
Setting a destination using latitude and
longitude
or