Lasersharp Auto Focus System; Video - Fluke Ti200 User Manual

Ti200, Ti300, Ti400, Ti450, Ti450SF6, Ti480
Users Manual
Option Menu
Bluetooth
WiFi Hotspot
Wireless
WiFi Network

LaserSharp Auto Focus System

The Laser Pointer/Distance Finder on the Imager is both a sighting aid and a part of the LaserSharp
Auto Focus System.
To prevent eye damage and personal injury, do not look into the laser. Do not point laser
directly at persons or animals or indirectly off reflective surfaces.
To use the LaserSharp Auto Focus System:
1. Select Camera > LaserSharp Auto Focus > On.
2. Point the Imager at the target.
3. Pull and hold the Secondary Trigger.
 shows at the top of the display.
4. Position the red laser dot on the target.
5. Release the Secondary Trigger.
The auto focus system automatically focuses on the object.
The laser pointer is aligned parallel to the infrared lens. In AutoBlend Mode, the laser pointer dot
is positioned just above the center point marker on the display. It can be easier to use your eyes
to locate the visible laser pointer on the target not on the display.

Video

The video controls include stop, rewind, fast forward, and pause/play functions. The thermal scene and
complexity of the recorded data affects the amount of time available to record a video. The video
capture format is set in the Settings menu. For more information, see File Format.
Record Video
To record:
1. Select Camera > Video.
2. Select Video/Audio or Video ONLY.
22
Table 12. Camera Menu (cont.)
Option
Uses Bluetooth technology to connect the Imager to a device
such as a wireless headset. See Wireless Connectivity.
Uses the Imager to create a wireless Hotspot when no WiFi
network exists. See Wireless Connectivity.
Connects the Imager to a WiFi network so you can sign into your
Fluke Connect account on the Imager. See Wireless
Connectivity.
 Warning
Description
Note