Ti200, Ti300, Ti400, Ti450, Ti450SF6, Ti480
Users Manual
WiFi Hotspot
Use the Imager to create a wireless Hotspot when no WiFi network exists. You can use the Hotspot to
download saved pictures or stream live images from the Imager to a PC with SmartView software or to
a mobile device with the Fluke Connect app. See Stream Live to a PC and Fluke Connect Wireless
System for more information. When WiFi Hotspot is on, shows in the upper left corner of the
display.
WiFi is for indoor use only in Kuwait, Chile, and United Arab Emirates.
To create a Hotspot, select Camera > Wireless > WiFi Hotspot > On.
To change the settings:
1. Select Camera > Wireless > WiFi Hotspot > Off.
2. Select Settings.
3. Select an option:
•
Name (SSID) to change the SSID
•
Password to turn the password on/off or to change the password
•
Channel to change the channel
4. Push to open a keyboard on the display.
5. Use the keyboard to enter the information for the option.
6. Push to go back.
7. Push to use the Imager.
WiFi Network
Use the WiFi Network setting to connect the Imager to a WiFi network and to sign into your Fluke
Connect account on the Imager. When WiFi Network is on, shows in the upper left corner of the
display.
To turn on the WiFi Network feature:
1. Select Camera > Wireless > WiFi Network > On.
2. Push Select to scan for available networks within range of the Imager.
3. Select a network.
4. Push to connect to or disconnect from a network.
5. If you are prompted, enter a password.
24
Note