Image Enhancement - Fluke Ti200 User Manual

Ti200, Ti300, Ti400, Ti450, Ti450SF6, Ti480
Users Manual
Option Menu
Display
Image
Enhancement
Logo
Distance
Zoom

Image Enhancement

Use the Image Enhancement menu to activate the advanced features of the Imager. Activate either
MultiSharp Focus or SuperResolution individually. Use Filter Mode with either MultiSharp Focus or
SuperResolution. Table 11 lists the options in the Image Enhancement menu.
Option
Filter Mode
Off
MultiSharp Focus
MultiSharp Focus (In
PC Only)
18
Table 10. Image Menu (cont.)
Option
Sets which graphics to view on the display.
<options>
Features that have On/Off controls must be turned on
and turned off with those controls.
Sets the advanced image enhancement features of the
<options>
Imager. See Image Enhancement.
On
Turns on/off the Fluke logo on the display.
Off
With SmartView software, upload a custom logo to the
Custom
Imager from your PC through the USB connection.
On
Turns on/off the distance units on the display. See
Distance.
Off
<options> Sets units to feet or meters. See Distance.
<options> Sets digital zoom level.
Table 11. Image Enhancement Menu
Combine values from successive frames within a small range of
temperatures to reduce pixel noise or thermal sensitivity (NETD) to as low
as 30 mK.
Turn off MultiSharp Focus mode or SuperResolution mode and not affect
Filter mode.
MultiSharp Focus captures several images focused on multiple targets
that are positioned at different distances from the Imager and creates one
image that focuses on the multiple targets at the same time.
In MultiSharp Focus mode, you can process the image in the camera or in
SmartView software.
In MultiSharp Focus (In PC only) mode, the image is not processed on the
Imager so you cannot view the image on the Imager. Use SmartView
software to view the image on your PC. Set the file format to .is2 for
MultiSharp Focus (In PC only) mode to work.
Description
Note
Description