Table of Contents
Advertisement
3 Power on
Cautions
When turning on the computer for the first time after purchase, do not connect any
peripheral equipment.
The power lamp turns off when the computer goes into the standby mode.
The standby lamp lights up in orange when the computer is in the standby mode.
When you turn off the computer, wait ten seconds before turning it on again.
The computer screen may be distorted or it may show horizontal lines when starting to
display the image or when changing the display mode (for example, when starting up or
shutting down Windows, or when recovering from the energy saving mode).
This is not a fault, you can continue to operate.
An error message is displayed, if an error is detected during POST.
Check the following, if the screen is blank.
The energy saving mode is not set.
Move the mouse or press any key. The computer may be shifted to S3 in the ACPI mode,
if the standby lamp is orange. Press the power button. If the screen remains blank 30 seconds
after you press the power button, then hold down the power button to turn the computer off.
The display brightness volume is adjusted correctly. Adjust the screen with the brightness
volume.
The AC adapter may get hot, but it is not a fault.
How to power on
CAUTION
Do not carry or give impact/vibrations to the computer while the computer
is on. Or, it may cause a failure.
23
Advertisement
Table of Contents
