Device Driver For Touch Panel Unit - Fujitsu DESKPOWER 6000 Seriesl DESKPOWER 6000 SD Series User Manual

Device Driver for Touch Panel Unit

How to Install Driver
When you try to "Update Driver", refer to " How to Uninstall Driver" first, and then refer to " How
to Install Driver". PS/2 Mouse is needed at the beginning of installing Driver's file.
Windows Me
1. Open [System] from [Control Panel], and select [Device Manager tab].
2. Double click the [Mouse] icon to check that "Device Name" is "PS/2 compatible mouse port",
then click [Property] button.
3. Open [Driver tab], and click [Refresh Driver].
4. Check "Search for the best driver for your device " is selected, then insert floppy disk, and
click [Next].
5. Select "Specify a location", and click [Browse].
6. Select "Fujitsu Touch Panel (PS/2)", and click [OK].
7. Click [Next].
8. File copy is done.
9. Click [Finish].
10. The message "Do you want to restart your computer now?" will appear and then click [NO].
11. Click [Start Menu] --> [Shut Down Windows] --> "Shut Down", and click [OK].
12. Check the Power is OFF, then take out floppy disk.
13. Remove the Mouse, and then attach the Panel.
Windows 98 SE
1. Open [System] from [Control Panel], and select [Device Manager tab].
2. Double click the [Mouse] icon to check that "Device Name" is "PS/2 compatible mouse port",
then, click [Property] button.
3. Open [Driver tab], and click [Refresh Driver],
4. Check "Search for the best driver for your device " is selected, then insert floppy disk, and
click [Next].
5. Select "Specify a location", and click [Browse].
6. Select "Fujitsu Touch Panel (PS/2)", and click [OK].
7. Click [Next].
8. File copy is done.
9. Click [Finish].
10. The message "Do you want to restart your computer now? "will appear, then click [NO].
11. Click [Start Menu] --> [Shut Down Windows] --> "Shut Down", and click [OK].
12. Check the Power is OFF, then take out floppy disk.
13. Remove the Mouse, and then attach the Panel.
Windows NT 4.0
Only Administrator can do this operation. And SP6.0 is needed to this system.
1. Double click [Mouse] icon of "Control Panel", and open [Property], then click [ALL tab].
2. Check the "Device Name" is "PS/2 compatible mouse port", and click [Refresh].
3. Click [Browse].
4. Insert the Driver's floppy disk, and point "A:\winNT", then click [OK].
15