Table of Contents
Advertisement
Important
Make sure that the power lamp indicated in the illustration below is off. If the power lamp is on,
turn off power, remove the power cord, and then restart the procedure.
5
Open the hooks on both sides of the slot.
6
Insert the memory board into the slot.
Hold the memory perpendicular to the slot and insert it in the slot, aligning the notch in the
memory board and the notch in the slot.
When the board is correctly inserted, the hook at the both ends stand up. Make sure that the
memory board is securely engaged.
Power lamp
Notch
59
Advertisement
Table of Contents
