Table of Contents
Advertisement
Command entry (key entry)
A command entry is represented in this manual as follows:
diskcopy
a:
↑
• Where character spacing is provided as shown by [↑], press the [Space] key once.
Commands, an example of which is given above in lowercase, can be entered in uppercase.
• [CD-ROM drive] indicate the name of the CD-ROM drive being used. Enter the drive name
inaccordance with your PC environment.
[CD-ROM drive]:\setup.exe
Sample screens and illustrations
The screen or illustration is one of the examples. Depending on the machine you use, the actual screen,
illustration, and file name may be different from the example. The illustration may be simplified for the
purpose of explanation, and it may not indicate the cables that are used in reality.
Representation of continuous operation
Continuous operation steps are represented in this manual by combining them with a "→" sign as
shown below:
Example: Continuous operation of clicking [Start], [Programs] and [Accessories]
↓
Click [Start] → [Programs] → [Accessories]
Representation of BIOS Setup
For the BIOS Setup procedure, a menu, submenu, and item may be connected with a hyphen to indicate
continuous selection as follows:
Example: Set [Serial Port 1] under [Advanced] to [Disable].
↓
[Advanced] → [Serial Port 1]: Disable
Floppy disk drive, CD-ROM drive
If your model does not have a floppy drive or CD-ROM drive, you need to purchase these peripheral
devices separately to use the drive.
For information about using the peripheral device, see the document that comes with the peripheral
device.
a:
↑
ix
Advertisement
Table of Contents
