Setting Up Windows Me/98 - Fujitsu DESKPOWER 6000 Seriesl DESKPOWER 6000 SD Series User Manual

Setting up Windows Me/98

1 Turn on the computer.
After a few seconds, the [Enter the network password] dialog box appears.
Point
Depending on your operating environment, [Welcome to Windows XX] appears instead of the
[Enter the network password] dialog box.
Go to the step 3.
2 Click [Cancel].
Point
If the [Add New Hardware Wizard] dialog box appears, do the following.
For Windows Me
1. Make sure that [Search for a suitable driver (recommended)] is selected, and click [Next].
After a few seconds, the optimum driver is automatically installed.
2. Click [Finish].
3. If a restart message appears, click [Yes].
For Windows 98
1. Click [Next].
2. Click [Display a list of all the drivers in a specific location...], and [Next].
3. Click [2915LP/2930LP Pci Scsi Controller [11-17-2000]], and click [Next].
4. Click [Next].
5. Click [Finish].
A restart message appears.
6. Click [Yes].
the [Welcome to Windows XX] screen appears.
3 For Windows Me, click [Next].
For Windows 98, enter [Name] and [Spelling], and click [Next].
You can skip [Spelling].
[License Agreement] is displayed.
This License Agreement describes the agreement for using preinstalled Windows on the computer.
30