Free Interval Measurement - Schiltknecht MiniAir20 Operating Manual

Delete measuring results
•
After the interval has expired, call the CLEAR Results command in the
main menu. Restarting the measurement also deletes frozen values.
Retriggering the interval measurement
•
With
The measurement is retriggered.
7.3.3

Free Interval Measurement

Parallel to the measurement by a defined interval, a free interval (timer
measurements) can also be set up and saved. This may be necessary
when two or more measuring periods of different lengths need to be
recorded at the same point. The defined standard interval is retained and
can be retriggered immediately for routine measurements.
Trigger/repeat/end measurement
Delete measuring results/timer interval
•
Call the CLEAR Results command in the main menu to delete the
measuring results. Restarting the measurement also deletes frozen
values.
•
Call the CLEAR Timer command in the main menu to delete the timer
interval. New intervals can be set up at any time with the above steps.
Schiltknecht Messtechnik AG
main menu. Activate START Interval here.
Status: Interval measurement
1. Go from profile to the main menu with
call and activate the START Timer function.
2. The free running measurement is triggered and
runs free. The duration is continuously updated in
the display. Open the STOP Timer command in
the main menu to end the timer measurement.
3. The measured time interval is saved after ending
with STOP Timer and can be retriggered at any
time by the REP Timer command.
MC20
and
23