10.2 Maintenance
Snap head principle:
Thanks to the snap head principle it is very easy to fit a new flywheel to the
flow sensor – pull the defective snap head straight off and push on the new
snap head. There is no need to send the sensor back to the factory for
repair. This avoids expensive downtimes.
Attention: Snap heads may only be replaced with others of the same design
(identical diameter and measuring range).
10.3 Inspection / Revision at the Factory
Depending on the purpose and time in use it is advisable to have the
measuring sensors checked or calibrated annually at the factory.
Schiltknecht Messtechnik AG
MC20
33