Schiltknecht MiniAir20 Operating Manual page 20

MC20
Measuring variables
Datalogger records all measuring variables for which
•
a suitable sensor is plugged in (chapter 5.2.1)
•
an optional channel is activated (volume measurement, chapter 7.1)
Prerequisites:
•
microSD card inserted and activated (chapter 6.2).
•
Actual value profile activated (chapter 7.2).
Setting
Start/end recording
If the logger is not stopped manually, recording takes place continuously
until the instrument is switched off or the battery is depleted. Log data are
retained in this case.
20
Status: Profile Actual value
1. Press in profile
2. Select Datalogger menu item, confirm with
3. Call Interval function and use keys
enter the desired time span between two
recordings. Setting range 1-999 s
1. Select Start Logger and activate with
status bar shows Log ACTIVE and the continuous
time. The menu can be closed after starting the
logger. The measured values are still recorded
until the datalogger is ended.
2. To end, call Stop Logger and confirm with
Then Log STOP and the measured time are
displayed in the status bar.
Main Menu
Schiltknecht Messtechnik AG
.
to
. The
.