Hold Function; Datalogger - Schiltknecht MiniAir20 Operating Manual

If no sensor is connected for one/several channels, the corresponding
fields remain grey.
The desired order can be set by pressing the keys
repeatedly. The measured value shown at the top is the
control variable. This is always displayed also in the main menu or
context menu for continuous visual control.
7.2.2

Hold Function

The Hold function can be used for situational holding of measured values.
Setting
Delete values
1. Press
2. Select Hold and deactivate with
profile, the display in the info bar goes out.
Save values
See chapter 8.2.1.
7.2.3

Datalogger

Datalogger enables the recording of momentary values in start-stop
measurement with adjustable interval (time span between two recordings).
At least 1,000,000 data records can be logged (card memory with 1 GB).
Schiltknecht Messtechnik AG
Status: Profile Actual value
1. Set sorting of the channels (see chapter 7.2.1) so
that the control variable is at the top of the
display for faster recording.
2. Press
3. With
moment with
info bar, measured values are held.
to go to the Shortcut menu.
to go to the Shortcut menu.
call Hold and activate at the right
. Hold display flashes in the
. Instrument switches back to
MC20
in
19