MC20
•
Display sensor type: Supported sensors (Table 5.2.1) are displayed
graphically and with their abbreviated name. The message Sensor type
not recognised is displayed for incompatible sensors.
5.4.1
Measuring Profiles
Two profiles are set up for different measuring requirements:
•
Actual value: Continuous measurement and display of the recorded
measuring variables (chapter 7.2).
•
Interval measurement: Recording of average values over predefined
or free intervals of time (chapter 7.3).
5.4.2
Activating and Exiting Profiles
Status: Start menu
Open the desired profile with
Exit a menu with
and confirm with
Start menu is displayed.
14
and activate it with
Exit measurement
.
.
Schiltknecht Messtechnik AG