Replacing The Status-Light Board; Procedure; Post-Requisites - Dell 13 7000 2-in-1 Service Manual

Replacing the status-light board

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.

Procedure

1 Place the status-light board in the slot on the palm-rest assembly and snap it into
place.
2 Slide the status-light board cable under the speaker cable.
3 Connect the status-light board cable to the system board.

Post-requisites

1 Replace the battery.
2 Replace the base
computer. After working inside your computer, follow
After working inside your
cover.
computer. For more safety best
www.dell.com/
Before
59