Replacing The Base Cover; Procedure - Dell 13 7000 2-in-1 Service Manual

Replacing the base cover

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.

Procedure

1 Connect the battery cable to the system board.
2 Align the tabs on the base cover with the slots on the palm-rest assembly and
snap the base cover into place.
3 Replace the nine screws (M2.5x5) that secure the base cover to the palm-rest
assembly.
4 Tighten the captive screw that secures the base cover to the palm-rest
assembly.
computer. After working inside your computer, follow
After working inside your computer. For more safety best
www.dell.com/
Before
17