Importing A Version 3.0 Or 3.1 Configuration - Sun Microsystems Secure Application Switch N1216 Release Notes

#
# Virtual service advanced settings
#
advanced tcbTemplateKey 0 ipTos Normal xmtRetryLimit 4 estRetryLimit
4 \
shortRxTimer 32_seconds longRxTimer 64_seconds rcvWnd 20480 xmtRTT \
1500_msec smmStreamLimit 1xRcvWnd estShortTimeout ExpRetr \
rcvWndDisabled false rcvMss 1460 xmtMss 1460 enableHttpMode false \
initParseWithData false rxUseLongTime false disableSynCookies false \
clientFirstProtocol true
exit; exit;
Correct:
#
# Virtual Service configuration
#
loadBalance virtualService name L4SLB_VS appServiceType L4SLB \
ipAddress 10.1.0.213 serviceGroupName L4SLB_VS adminState \
enabled disableDelay 0 protocol TCP port 80 vRouter \
LB_ServiceLan:default clientSrcIPRange 0.0.0.0-255.255.255.255 \
synRateLimit unlimited
loadBalance virtualService name L4SLB_VS
#
# Virtual service advanced settings
#
Note – The .cdb file name will remain the same after the upgrade.

Importing a Version 3.0 or 3.1 Configuration

If you have installed version 3.2.1 onto a switch that was already equipped with
version 3.0 or 3.1, the configuration database is automatically upgraded.
If you need to import a "portable" version 3.x configuration into a version 3.2.1
system, you can choose either of the following options:
Verify that the Interactive feature is turned off.
■
At the switch prompt, type the following text then press the Enter key:
15
Sun Secure Application Switch – Release Notes for v3.2.1