Sun Microsystems Secure Application Switch N1216 Release Notes page 11

Declaration of Conformity
Compliance Model Number:
Product Name:
EMC
USA—FCC Class A
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This equipment may not cause harmful interference.
2. This equipment must accept any interference that may cause undesired operation.
European Union
This equipment complies with the following requirements of the EMC Directive 89/336/EEC:
As Telecommunication Network Equipment (TNE) in both Telecom Centers and Other Than Telecom Centers per
(as applicable):
EN300-386 V.1.3.2 (2003-2005)
EN55022:1994+A1:1995+A2:1997
EN61000-3-2:2000
EN61000-3-3:1995+A1:2000
IEC61000-4-2
IEC61000-4-3
IEC61000-4-4
IEC61000-4-5
IEC61000-4-6
IEC61000-4-11
As Information Technology Equipment (ITE) Class A per (as applicable):
EN55022:1994+A1:1995+A2:1997
ENG6100-3-2:2000
ENG61000-3-3:1995+A1:2000
EN55024:1998+A1:
2001+A2:2003
IEC61000-4-2
IEC61000-4-3
IEC61000-4-4
IEC61000-4-5
IEC61000-4-6
N2040; N2120
Sun Secure Application Switch
- N2000 Series
Required Limits:
Class A
Pass
Pass
6 kV (Direct), 8 kV (Air)
3 V/m 80-1000 MHz, 10 V/m 800-960 MHz and 1400-
2000 MHz
1 kV AC and DC Power Lines, 0.5 kV Signal Lines,
2 kV AC Line-Gnd, 1 kV AC Line-Line and Outdoor
Signal Lines, 0.5 kV Indoor Signal Lines > 10m.
3 V
Pass
Class A
Pass
Pass
Required Limits
4 kV (Direct), 8 kV (Air)
3 V/m
1 kV AC Power Lines, 0.5 kV Signal and DC Power
Lines
1 kV AC Line-Line and Outdoor Signal Lines, 2 kV
AC Line-Gnd, 0.5 kV DC Power Lines
3 V
xi