Installing Version 3.2.1 Software; Importing A Version 2.0 Configuration - Sun Microsystems Secure Application Switch N1216 Release Notes

Installing Version 3.2.1 Software

If you have version 2.0 software installed on your Sun Secure Application Switch
and you want to upgrade to version 3.2.1 software, do the following:
Note – If you have software version V2_0R4 or later, you can bypass Step 1 and
proceed to Step 2.
1. If you have software version V2_0R3 or earlier, you must obtain and install the
compression utility patch from SunSolve Online (119731) before upgrading to
version 3.2.1.
You can access the SunSolve Online Web site at the following URL:
http://sunsolve.sun.com
2. Obtain and install the V3_2R1 software release from the Sun Download Center.
You can access the Sun Download Center Web site at the following URL:
http://www.sun.com/downloads
After the page loads, click Networking and scroll down to Network Connectivity, to
access the software link.
3. Reboot the switch.
After installing the version 3.2.1 software, the configuration database will
automatically be upgraded to the 3.x format.
Note – The .cdb file name will remain the same after the upgrade.

Importing a Version 2.0 Configuration

If you have installed version 3.2.1 onto a switch that was already equipped with
version 2.0, the configuration database is automatically upgraded.
If you need to import a "portable" version 2.0 configuration into a version 3.x
system, you can choose either of the following options:
Verify that the Interactive feature is turned off.
■
At the switch prompt, type the following text then press the Enter key:
sun(config)# interactive off
Import the running configuration with stopOnError set to false, similar to the
■
following:
8
Sun Secure Application Switch – Release Notes for v3.2.1 • August 2007