System Management - Sun Microsystems Secure Application Switch N1216 Release Notes

sun(config)# interactive off
Import the running configuration with stopOnError set to false, similar to the
■
following:
sun(config)# import runningConfig FromFile <
password <
Perform the following manual editsRemove on any non-terminated virtualServices:
L3SLB, L4SLB, TDLB, FWLB
In this example:
#
# Virtual Service configuration
#
loadBalance virtualService name WMA-STREAM-HTTP_213
appServiceType L4SLB \
ipAddress 10.49.0.213 serviceGroupName WMA-STREAM-HTTP
adminState \
enabled disableDelay 0 protocol TCP port 80 vRouter \
LB_ServiceLan:default clientSrcIPRange 0.0.0.0-255.255.255.255
\
synRateLimit unlimited
loadBalance virtualService name WMA-STREAM-HTTP_213
#
# Virtual service advanced settings
#

System Management

Administrators can use multiple management tools to support the Sun Secure
Application Switch in a network. These tools include:
Command-Line Interface (CLI)
■
Web interface
■
SNMP applications
■
16
Sun Secure Application Switch – Release Notes for v3.2.1 • August 2007
> stopOnError false
myPassword
>
myConfig.txt