Installing Version 3.2.1 Software - Sun Microsystems Secure Application Switch N1216 Release Notes

In version 3.0 and 3.1, the URI_PATH includes the path and filename. For example,
if a file is archived as http://Host/Directory/File.html, the URI_PATH is
/Directory/File.html and the URI_BASENAME is File.
In contrast, the URI_PATH in software version 3.2.1 contains the characters after the
host (or port number) and up to the file name, including the slash separator. For
example, if your file is archived as http://Host/Directory/File.html, the URI_PATH
is /Directory/ and the URI_BASENAME is File.
Note – The behavior of the URI Path as it pertains to object rules is the same in
software versions 2.x and 3.2. Therefore, if you are upgrading from 2.x to 3.2.1,
object rule expression changes are not required.

Installing Version 3.2.1 Software

1. Obtain and install the V3_2R1 software release from the Sun Download Center.
You can access the Sun Download Center Web site at the following URL:
http://www.sun.com/downloads
After the page loads, click Networking and scroll down to Network Connectivity to
access the software link.
2. Reboot the switch.
After installing the version 3.2.1 software, the configuration database will
automatically be upgraded to the 3.0 format.
3. Remove advanced options for non-terminated virtual services: L3SLB, L4SLB,
FWLB, and TDLB.
Incorrect:
#
# Virtual Service configuration
#
loadBalance virtualService name L4SLB_VS appServiceType L4SLB \
ipAddress 10.1.0.213 serviceGroupName L4SLB_VS adminState \
enabled disableDelay 0 protocol TCP port 80 vRouter \
LB_ServiceLan:default clientSrcIPRange 0.0.0.0-255.255.255.255 \
synRateLimit unlimited
loadBalance virtualService name L4SLB_VS
14
Sun Secure Application Switch – Release Notes for v3.2.1 • August 2007