Configuration Synchronization; Behavior Change: Show Runningconfig Savetofile Command; Behavior Change: Show Switchservices Chassis Cpuload Command; Behavior Change: Default Vrouter For Virtual Services - Sun Microsystems Secure Application Switch N1216 Release Notes

Configuration Synchronization

For information about Configuration Synchronization, refer to the Sun Secure
Application Switch - Configuration and Implementation Guide, part number 819-7595.
Behavior Change: Show runningConfig
saveToFile Command
In version 3.2.1, the defaultValues and nameValuePairs are included by default when
a show runningConfig saveToFile command is executed. In previous versions
of the software, you had to manually set defaultValues and nameValuePairs to
true to include this information.
Behavior Change: Show switchservices
chassis cpuLoad Command
In version 3.2.1, the show switchservices chassis cpuLoad command no
longer exists. Use the show switchservices chassis module command
instead to perform similar actions.
Behavior Change: Default vRouter for Virtual
Services
When creating a virtual service, the default vRouter has changed from
system:shared to the user defined vRouter that is associated with the vSwitch.

Long-Lived Sessions

If long-lived session is enabled, up to 30,000 of a media module network processor's
500,000 active flow sessions can be reserved for long-lived usage. As new flows are
required, the oldest inactive sessions are purged first. Long-lived sessions apply to
L4SLB and L3SLB Virtual services. The default setting for long-lived sessions is
disabled. When the feature is disabled, flow sessions will exist for 90 seconds with
no activity. FWLB sessions are long-lived by default.
4
Sun Secure Application Switch – Release Notes for v3.2.1 • August 2007