Conference; Ending Calls - Siemens EF81 User Manual

of EF81 KESTREL FCC us-en, (31.01.2006, 10:49)
right page (43)
Accepting the waiting call in addition to
the first
Ý
Depending on your settings
(page 131) you can also accept the
waiting call by simply opening the
clamshell.
If the clamshell is closed, press
to swap between the calls.
Or (if the clamshell is open)
A
§Swap§/
The current call is put on hold.
To swap between the two calls when
two connections are established,
always press
Rejecting the waiting call
µ
Or (if the clamshell is open)
§Reject§
Accepting the waiting call, ending the
current call
(Only if the clamshell is open)
B
C
Accept the waiting call.
Accept the waiting call.
A
.
Press.
Press.
End the current call.
Accept the new call.

Ending calls

Clamshell closed
µ
Clamshell open
B
‡
Or
§Options§
After the
Return to held call?
you have the following options:
§Yes§
§No§

Conference

(Not during video calls)
Call up to 5 parties one by one and
link them together in a multiparty
call. Some of the functions described
may not be supported by your ser-
vice provider or may have to be
enabled specially.
You cannot establish a conference when
the clamshell is closed.
When closing the clamshell you can con-
tinue an ongoing conference if you are in
handsfree mode (page 31).
Calling
Press. You return to the
held call.
Press the End key briefly.
Open menu and
select Drop.
display,
You accept the held call.
You end the held call.
43
b