Table of Contents
Advertisement
of EF81 KESTREL FCC us-en, (31.01.2006, 10:24)
left page (54)
54
Contacts
Recording a voice tag
Record the voice tag in a quiet envi-
ronment. You should speak into
the phone from a distance of about
25 cm. The voice tag may be 3 sec.
long.
If you use voice-activated dialling mainly
with a handsfree set it is useful to record
the voice tag with the handsfree set.
F
I
I
§Options§
§Start§
A short signal is sounded. An
appropriate prompt appears on
the display. Speak the name (max.
3 seconds). Repeat the name after
playback. A second signal tone is
sounded and you are prompted on
the display.
C
Open the Contacts tab.
Select a contact.
Select number input field.
Open menu and select
Record voice
tag.
Start recording.
Confirm completed
recording.
If your two recordings are too differ-
ent or if they are too similar to an ex-
isting voice tag, you will be prompt-
ed to repeat recording.
§Retry§/§Restart§
Press to start recording
again.
If three attempts fail you have to
start a new voice tag.
If there is not enough memory for a new
voice tag, a notification is displayed. Con-
firm notification, delete existing tags and
try again.
Voice-activated dialling
Clamshell closed
If a headset is plugged into the
phone: Press the activation key
on the headset to activate voice
dialling.
Clamshell open
G
Press and hold.
Speak the name after the signal
tone. If the name matches the saved
voice tag the number is dialled.
You can assign the voice dialling function
to any shortcut key (page 128).
Advertisement
Table of Contents
