Siemens EF81 User Manual page 133

of EF81 KESTREL FCC us-en, (31.01.2006, 10:24)
right page (133)
Device check
After the last information page,
a self-test as well as the individual
test are offered. If you select
all individual tests are carried out.
Software version
To display the software version for your
phone in standby mode:
*
# 0 6 #, and select the Configuration tab.
Device manager (DM)
Sessions can be initiated in different
ways.
• Manual session: You start the DM
session via this menu option.
• Software update: The phone
checks the software status each
time it is switched on. If an update
is available a request is displayed.
Confirm the requests to start the
software update and to re-boot
your phone.
If you want to start a session the battery
must be charged at least 50%.
The phone default settings vary from
service provider to service provider
and can be as follows:
• The settings have already been
implemented by the provider. You
can start immediately.
• Access profiles have already been
created by your provider. Select
and activate a profile.
• The access profiles must be con-
figured manually. If necessary,
check with your service provider
for details. You will find the cur-
Self test,
rent settings for the service pro-
vider on the Internet at
www.BenQ-Siemens.com/
mobilephonescustomercare
under "FAQ".
Manual session
Display the currently active profile
and summary results of the last
session.
§Options§
Start
Select
profile
Last
session
Resume
session
For standard functions see page 29.
Profile options
§Options§
Activate
Edit profile
Restore
defaults
For standard functions see page 29.
Settings
Open menu.
Start the DM session.
Select a profile (profile
options see below).
Show the details of the last
session (e.g. date, time,
additional info).
If the last session can be re-
sumed: resume last session.
Open menu.
Activate the highlighted
profile.
Edit the highlighted profile
(see page 134).
Restore the profile to the
default values.
133