Charging Terminals In The Chargebase; Mounting The Chargebase - Honeywell Dolphin 9900 User Manual

Charging Terminals in the ChargeBase

The Dolphin ChargeBase charges the main battery of each terminal in less than four hours. The
ChargeBase uses the intelligent battery charging system incorporated into all Dolphin terminals that
prevents overcharging. This means that Dolphin terminals may be stored in the ChargeBase indefinitely
without damage to the terminals, battery packs, or the ChargeBase.
1. Power the ChargeBase; see
2. Insert a terminal into a terminal well; see
3. The Charge LED lights green to indicate that the terminal is powered and charging.

Mounting the ChargeBase

The Dolphin ChargeBase should be mounted to a dry, stable surface. When choosing a location, always
bear in mind that
• The mounting location must allow users easy access to the power connector.
• The ChargeBase should be oriented so that users can easily read the labels.
Bottom Panel
The bottom panel of the Dolphin ChargeBase offers two mounting options: insert a DIN Rail for desk
mounting or use mounting brackets with the available screw slots for wall mounting.
Rubber Feet
Dolphin® 9900 Mobile Computer User's
Guide–Preliminary
Supplying Power to the ChargeBase
Inserting and Removing Terminals
DIN Rail Slot
Rev (a) 02
3/5/08
on page 12-4.
on page 12-4.
Screw Slots
12 - 5