Inserting And Removing Terminals; Charging Terminals - Honeywell 9900LUP-6211G0 - Hand Held Products Dolphin 9900 User Manual

Inserting and Removing Terminals

1. To insert the terminal, hold the terminal with the bottom panel perpendicular to the base.
2. Slide the terminal into the well until the Dock LED lights solid green.
3. Charging begins immediately.
Note: To remove a terminal, grasp it firmly in your hand and lift it up and out of the terminal well. The LEDs for the
terminal well turns off.

Charging Terminals

The main battery of each terminal charges in 4.5 hours. The intelligent battery charging system
incorporated into all Dolphin terminals prevents overcharging, which means that Dolphin terminals may
be seated in the base indefinitely without damage to the terminals, battery packs, or the base.
1. Power the base; see Supplying Power on page 13-3.
2. Insert a terminal into a terminal well; see Inserting and Removing Terminals on page 13-4.
3. The Charge LED lights green to indicate that the terminal is powered and charging.
13 - 4