Connections Manager
Microsoft's connection manager sets up multiple network connections to Internet Service Providers (ISPs)
via external modem.
Do NOT enter connection parameters in the connections manager if:
• You are using one of the on-board wireless radios to connect to a network.
The Dolphin terminal uses the settings from each radio's configuration utility to connect.
• You are using Wireless Zero Config (WZC). By default, WZC is disabled on Dolphin terminals.
You also use the connections manager to establish a data connection with the GSM radio; for details,
To Access the Connections Manager:
Tap Start > Settings > Connections tab > Connections icon
Task Tab
The Task tab enables you to initially configure, then manage network settings when using a modem.
Select an item in this list and then complete the setup screens that follow with the appropriate information
for your network.
My ISP
The links under this heading enables you to add and manage modem connections to an ISP. To complete
the setup screens, obtain the following information from your ISP:
• ISP dial-up access telephone number
• Username
• Password
• TCP/IP settings
My Work Network
These links enable you to establish the following connections types:
• Modem
• Virtual Private Network (VPN)
• *Proxy server connection
7 - 4
Rev (a) 02
3/5/08
.
Dolphin® 9900 Mobile Computer
User's Guide–Preliminary